Review on 🧲 Creality 3D Ultra-Flexible Magnetic Additive Manufacturing Products with Removable Design by Ricky Habbani

This is the third time I've used the Creality magnetic build surface. I'm printing with eSun PETG, which requires a bed temperature of 70°C. As others have pointed out, the surface demagnetizes over time and at higher temperatures. In addition, bubbles begin to form on the underside, which are not visible from above, but create an uneven surface. If I print almost every day (but not 24/7) it takes me about 7 months for the printing surface to degrade enough to affect prints. Check the floor regularly for blisters and order a new one as soon as this happens. Accordingly, I treat it like a consumable and buy a new one every 6 months. Printing on this surface works great - I have no adhesion issues and get finished prints off the surface. No scrapers or spatulas are required. I just wipe it down with iso alcohol before each print - no other coatings or tape needed. You must be careful when bending the surface to remove prints. The surface may wrinkle if bent at too sharp an angle, so handle it carefully. I did this immediately with my first surface, but still got a lot of value out of it by simply shifting the pressure to the uncrease part of the surface when cutting. I highly recommend this surface for hassle-free printing. . Minus 1 star for limited lifespan.