Header banner
Revain logoHome Page

🖨️ 3D Printer Parts & Accessories

Durable Commercial Door Closers for Heavy Traffic Areas

In the fast-paced world of commercial establishments, where foot traffic is incessant, it becomes imperative to invest in high-quality door closers that can withstand the rigors of heavy usage. Designed specifically for heavy traffic areas, durable commercial door closers offer reliable and efficient door control while ensuring smooth and safe operation.

Weather-Resistant Commercial Door Sweeps for Outdoor Applications

When it comes to securing the entryways of outdoor facilities against the elements, specialized weather-resistant commercial door sweeps emerge as indispensable solutions. These meticulously engineered sweeps are crafted using durable materials and cutting-edge technology to effectively seal gaps, preventing water, dust, drafts, and other outdoor nuisances from infiltrating indoor spaces.

Specialized Commercial Door Locks for High-Security Facilities

High-security facilities demand uncompromising measures to protect their assets, personnel, and sensitive information. That's where specialized commercial door locks come into play, offering an unparalleled level of security. These locks employ advanced mechanisms, such as biometric access control, electronic keypads, and multi-factor authentication, ensuring only authorized individuals gain entry while deterring unauthorized access.

Industrial-Grade Commercial Door Handles for Warehouses

In bustling warehouse environments, where countless hands operate doors throughout the day, industrial-grade commercial door handles prove to be stalwart companions. These handles are purpose-built to endure the demands of heavy usage, providing ergonomic grip, exceptional durability, and reliable performance. Whether it's a sliding door or a hinged one, these handles facilitate smooth operation, enhancing efficiency and productivity within the warehouse.

Heavy-Duty Commercial Door Hinges for Industrial Applications

Industrial applications necessitate robust infrastructure components, and heavy-duty commercial door hinges rise to the challenge. These sturdy hinges are engineered to bear substantial loads, making them ideal for large industrial doors that are subject to frequent opening and closing. Built with durability in mind, they ensure long-lasting performance and maintain door alignment even under immense pressure.

All results
pack of 5 tmc2208 stepper motor drivers for 3d printers, dorhea v1.2 module with heat sink and screwdriver for reprap, ramps1.4, mks, prusa i3, ender-3 pro controller boards logo
Revainrating 4 out of 5

19 Review

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision. The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because…

Read more about this product
bigtreetech skr mini e3 v3.0 control board + tft35 e3 v3.0.1 graphic smart display panel board new upgrade 3d printer parts for ender 3, ender3 pro, ender 3 v2 logo
Revainrating 4.5 out of 5

13 Review

【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;. 【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;. 【Increased Heat Sink】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly…

Read more about this product
bigtreetech tft35 v3.0.1 graphic smart display controller board for 3d printer ramps 1.4 reprap 3d printer can select two work modes logo
Revainrating 4 out of 5

13 Review

1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode. 2.Serial port screen mode supports two printing modes: SD card and U disk. 3.Reserve WIFI port, and WIFI function is realized by external WIFI…

Read more about this product
nema 17 stepper motor with built-in 400mm t8 lead screw for improved reprap prusa i3 3d printer z axis or cnc machine performance - iverntech logo
Revainrating 3.5 out of 5

9 Review

Iverntech NEMA 17 Stepper Motor with Integrated 400mm Tr8x8 Lead Screw, much stable than shaft coupling connecting. High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires. Come with a brass nut and 1M (39.37") motor wire. 2mm pitch, 4 starts, 8mm lead. Great replacement for the Z axis of prusa i3 3d printers

10mm x 11mm black plastic open type cable wire carrier drag chain towline r18 for 3d printer and cnc machines - 1 meter length logo
Revainrating 5 out of 5

7 Review

The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement. You can link the cables with each other to form long length you need, Internal Size : 10 x 11mm/0.39inch x 0.43inch(H*W), External Size : 15 x 18mm/0.59inch x 0.71inch(H*W), Total Length : 1Meter/39.4inch, Weight : 153g, Package Content…

Read more about this product
bigtreetech skr 3 ez control board 32bit new upgrade silent board support ez2209/ ez5160/ ez2130 stepper driver compatible tft series touch screen, diy for most fdm 3d printer (with 5pcs ez2209) logo
Revainrating 2 out of 5

7 Review

✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users. ✨SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series…

Read more about this product
pack of 3 hictop 3d printer brass nozzles with 0.4mm diameter and 1.75mm extruder tubes for reprap prusa i3 logo
Revainrating 4.5 out of 5

6 Review

[Application] : Reprap Prusa I3 3D Printer (Extrude). [Brass nozzle size]:13mm*6mm. [Tube Inner Diameter] : 2mm / Length : 26mm. [Material ]: Stainless Steel, Brass. [SERVICE COMMITMENTS]: We offer 90 Days Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your complaints and 100% get your money back.

winsinn dual gear extruder, compatible with ender 3 cr10 cr-10 pro cr-10s tornado upgraded aluminum drive feed for 3d printer 1.75mm filament (dual connector) logo
Revainrating 4.5 out of 5

6 Review

✔️Due to Creality batches, the original motor shaft of the Ender 3 pro printer may not be perfectly fit for our dual gear. After correct installation, although the gear on the motor shaft looks a little higher than the shaft of the motor, it will not loosen after being. Of course, you can replace the full size of 42mm high stepper motor if the stock…

Read more about this product
optimize your 3d printing with phrozen building platform for sonic mini 4k logo
Revainrating 4 out of 5

6 Review

【Easy-To-Calibrate】We use 4 point calibration and you can do one-click calibration by using software - Reliable & Easy handling. 【Rigid & No Deformation】Use all aluminum material and good for long term use. 【Cost-Effective】Light weight, friendly price. You can buy more building plates at same price and optimize your printing process. Applicable Models…

Read more about this product
iverntech nema 17 stepper motor with integrated 350mm t8 lead screw: the ultimate solution for precise z axis movement in 3d printing and cnc machining logo
Revainrating 3.5 out of 5

6 Review

2mm pitch, 4 starts, 8mm lead. High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires. Come with a brass nut and 1M (39.37") motor wire. NEMA 17 Stepper Motor with Integrated 350mm Tr8x8 Lead Screw, much stable than shaft coupling connecting. Great replacement for the Z axis of prusa i3 3d printers

upgrade your printing experience with phrozen building platform for sonic mini 4k logo
Revainrating 3.5 out of 5

6 Review

【Easy-To-Calibrate】We use 4 point calibration and you can do one-click calibration by using software - Reliable & Easy handling. 【Rigid & No Deformation】Use all aluminum material and good for long term use. 【Cost-Effective】Light weight, friendly price. You can buy more building plates at same price and optimize your printing process. Applicable Models…

Read more about this product
stainless steel 3d printer nozzle cleaning kit - 10 cleaning needles (0.4mm) for effective maintenance and precision, aokin nozzle cleaning tool kit logo
Revainrating 4 out of 5

5 Review

Package Included: 10 Pcs 0.4mm 3D printer nozzle cleaning needles in a bottle. Compatibility: fit for most of the 0.4mm 3D Printer extruder nozzles, such as MakerBot, RepRap, Creality CR-10, Ender 3, Prusa I3, Anet A8, E3D, MK8, MK10, etc. Material: the needles and tweezers are made of high-quality stainless steel material. The needles are sturdy…

Read more about this product
24v 250w hictop mk3 aluminum heated bed hot bed pcb heatbed platform for reprap 3d printer - 275 x 220mm logo
Revainrating 4 out of 5

5 Review

No soldering required, safe and convenient. Dimensions: 275mm x 220mm x 3mm. 24V wire configuration; Long wire leads ( 21"). Easy to install on arrival. Compatible with most Prusa i3 variations of 24V power supply, we have 12V bed listing for 12V power supply as well.

🔧 iverntech nema 17 stepper motor with integrated 100mm t8 lead screw for reprap prusa i3 3d printers z axis and cnc machines... logo
Revainrating 2.5 out of 5

5 Review

2mm pitch, 4 starts, 8mm lead. High torque nema 17 stepper motor, 400mN.m/57.1 oz.in, 42mm, 2 phase 4 wires. Come with a brass nut and 1M (39.37") motor wire. NEMA 17 Stepper Motor with Integrated 100mm Tr8x8 Lead Screw, much stable than shaft coupling connecting. Great replacement for the Z axis of prusa i3 3d printers

set of 10 aokin 0.6mm brass nozzles for e3d v5 v6 3d printers and 5 stainless steel 0.5mm filament cleaning needles, compatible with 1.75mm filament logo
Revainrating 4.5 out of 5

4 Review

Size: the 3D printer nozzles, Out Thread: M6, Filament Diameter: 1.75mm, Output Diameter:0.6mm. Compatible: 10 x 0.6mm 3D printer extruder nozzle for E3D V5 V6 1.75mm PLA ABS 3D printer. 5 x 0.5mm nozzle cleaning needles in a bottle. Material: the 3D printer nozzles are made of premium brass, sturdy and high-temperature resistance, smooth silk, connect…

Read more about this product
high-quality assembled metal extruder hotend for additive manufacturing process – top printers & products logo
Revainrating 3.5 out of 5

4 Review

The metal hotend kit suitable for almost series of Creality Ender and CR printers. The hotend is pre-assembled for easy installation. HIGH PRECISION: Cooling system with high quality and the frosting surface of aluminum shell anodized for more sturdy and wearable; integrated structure are convenient for disassembly, repair and assembly. Rigorous Process…

Read more about this product
2020 profile x-axis straighten tensioner & z-axis leadscrew top mount upgrade for creality ender 3/pro, cr10, cr10s, and more by winsinn logo
Revainrating 3 out of 5

4 Review

✔️ WINSINN Upgrade parts works with Creality Tornado Ender 3 / Pro, CR10, CR10S. etc. ✔️X-axis Straighten Tensioner + Z-axis Leadscrew Top Mount. ✔️Upgrade Nut and GT2 Idler Pulley for easier use. For 6mm Belt. ✔️This Kit NOT include the instruction manual, we need to DIY :). ✔️Made by WINSINN, make sure the "WINSINN" label on the box for our…

Read more about this product
🖨️ enhanced printer performance with the creality leveling compatible mainboard logo
Revainrating 5 out of 5

3 Review

【Upgrade Independent development】CR Touch is upgraded to a metal probe, Exquisite exterior design,Positioning accuracy ≤0.04mm , Automatic detection and leveling , It can be reused for more than 100,000 times. 【Easy to install and easy to use】Download the CR Touch program from the Creative official website and copy it to the TF/SD card. Insert it…

Read more about this product
creality original flexible removable 235x235mm: the ultimate 3d printer upgrade logo
Revainrating 5 out of 5

3 Review

ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the…

Read more about this product
Didn't find what you were looking for?
If you could not find on our platform the desired company or product for which you wanted to write a review, you can create a new page of the company or product and write the first review on it.