These connectors are ruggedly constructed and accept 14 AWG speaker wire. I used a Hakko FX-888D soldering station set to 600F with 60/40 solder and it was easy to do. I would recommend tinning the wire before soldering the wire to the plug and applying flux to the inside of the plug to help the solder spread evenly over the inside of the glass. There was no sign of stress at the connector and solder joint, so I have a feeling they will hold up for years of normal use. I also tested the petal ends on some 5 position clamp posts and the size was right and the fit was snug but not too loose or tight. My only complaint is with the plastic material used for the connector housing. It is very stiff and hardly pliable at room temperature. The tolerances between connector and body are extremely tight and I found the reds to be even larger than the blacks where I had to use pliers and a lot of force to get the body onto the connector after soldering. I appreciate the tight fit where the housing doesn't just slide off the connector, but I find if the housing were slightly beveled and beveled, or the end of the connector was slightly beveled and tapered, it would be a lot easier to slide it onto the case Plug. connector after soldering.
🔌 Amysen Smart Plug - Certified Compatible with Alexa, Echo & Google Home - WiFi 2.4G (4-Pack)
9 Review
Leviton 2711 Industrial Grade 30 Amp Locking Plug - NEMA L14-30P, 125/250 Volt, Grounding, Black-White
9 Review
RVGUARD NEMA 6-50R Receptacle, 250 Volt 50 Amp Female Plug, 6-50R Welder Replacement Receptacle
10 Review
Smart socket ELDEV WI-FI 16A ELDEV (Alice, Google Home, Marusya) Tuya protocol, works without a gateway, Smart Plug
15 Review
💡 High-Quality Advance ICN-4P32-SC Electronic Fluorescent Ballast: Ideal for 4 Lamps, 32W T8, 120/277V
3 Review
🔌 Robertson 2P20132 Quik-Pak: 10 Fluorescent eBallasts for 2 F40T12 Linear Lamps, Preheat Rapid Start, 120Vac, 50-60Hz, Normal Ballast Factor, NPF, Model RSW234T12120 /A (Crosses to RSW240T12120 /B)
4 Review
Wireless Electronic Ballast Interface Certified
8 Review
💡 Electronic FL Ballast ICN-4P32-N (Formerly ICN-4P32-SC) for 3-4 F32T8 F40T8 F17T8 Lamps, 120V/277V Compatibility
5 Review