I bought the 10ft and 20ft sets. I noticed that all the nuts tightening around the cable on the connectors need to be tightened a bit. I pinned them without thinking twice until I used the 10ft cords. You had no output voltage at the inverter. I did some troubleshooting and found that the piece of metal inserted into the plastic connectors was not fully seated and not making contact. I removed the nut and found that the weathersleeve was misaligned and the piece of metal was not fully seated. I fixed it and the cables worked fine. That being said, I like 8 AWG wire since I need to run it 30 feet from the inverter. I used to try to minimize the length of the DC cable to the inverter. This kept the line inverter installed under the solar panels. After two inverters failed I figured it might be the environment so I took them to a nearby barn. I did this today so I don't know if this will fix the line inverter issue. Hopefully! I also hope that the 8 AWG wire doesn't have much loss.
Keep Your Battery Fully Charged With A Smart 12V Charger/Maintainer Featuring Winter Mode
28 Review
70mai Jump Starter Max Midrive PS06 black
37 Review
Efficient Charging With LST 7 Stages 5A Battery Charger - 3.3A 12V For Ultimate Performance
35 Review
Mroinge Automatic 6V/12V Trickle Charger For Vehicles, Motorcycles, Boats And More - Maintain Your Batteries With Ease!
29 Review
Rechargeable screwdriver OA-3,6F (433.0.2.00), 3.6 V, 1.3 Ah Li-ion, blister
46 Review
Bit and socket set Stels Tool set, 1/2", 1/4", CrV, plastic case 94 pcs, Stels, 94 pcs, black
46 Review
Xiaomi Mijia Ratchet Screwdriver 16 in 1 Screwdriver with Interchangeable Bits, 10 pcs, Black
22 Review
Tool set Ombra OMT82S12, 82 pcs, brown
22 Review