Review on 🔧 Enhanced Repair Kit for Samsung Dryer | Includes DC97-16782A Dryer Roller, DC93-00634A Idler Pulley, 6602-001655 Dryer Belt | Fit Models 6 and 7 by Mike Davan

Received and installed. The rubber had already started to separate from the plastic on two of the four rollers. The rubber was also worn to the bottom of my dryer with black rubber dust. In addition, the rollers left a rubber ring on the drum itself as it heated up, rotated and the cheap rubber wore out. So after disassembling my dryer a week ago and replacing the rollers and drive belt (I didn't want to install an idler pulley because the bearing inside could be sand) I had to disassemble it again tonight after installing it. with a piercing squeak for the last 2-3 days. Except I didn't have the parts so I had to reorder when buying genuine parts. I moved the work roll to the back and the broken roll to the front so I didn't have to remove the drum again. But of course I have to disassemble the drum again, because these parts are guaranteed to fail sooner or later. So no, I will not buy it again. So far, two breakdowns and a third are required. UPDATE: Another roller is out of service. DO NOT INSTALL ROLLS WHERE EXISTING ROLLS MATCH EXISTING ROLLS. Buy OEM. These parts use mild steel. The shaft was worn through and after two weeks of operation the "bearing" was gone. You cannot install them incorrectly. Terrible quality case. UPDATE: All four wheels defective. Broke again. I have now installed (4) OEM wheels to replace those four unnecessary parts. The edges of the drive belt also begin to crumble. All parts in this package are junk. Save and buy OEM, still on Amazon and slightly more expensive ($12 per wheel) but 100% worth it. UPDATE: Broken belt. Lasted three months. Thank goodness I didn't install the tensioner as 6/6 of the defective parts could be even cooler than 5/5 of the defective parts.