I bought two of these for my 2018 GMC Sierra. The first one took about an hour to install. The second side (next day) took about 20 minutes. Very easy to install. Rivets require a 17/32 drill bit, which I didn't have. I used a size larger than half an inch and a masonry bit to open up the hole a bit. The instructions say to tighten the rivet nut to 20 ft-lbs. but they turned in the hole when the screw was tightened. I used a battery powered impact wrench to tighten them (not too tight like the instructions say). I couldn't find a torque wrench for the bolts during final assembly and had to use a small 1/4" socket to tighten. I have a 6.5 foot bed with factory footboards. I needed to move the base plate closer to the wheel, like on the picture in the instructions for the 5.5ft bed to avoid hitting the steps Looks perfect.
SuperJump Trampoline with SuperJump 8ft (244 cm) net and ladder
29 Review
4WD ORCISH Recovery Traction Boards Tracks Tire Ladder For Sand Snow Mud - Set Of 2 (2Nd Gen Bag + Mounting Pins, Black)
39 Review
Yokohama Ice Guard IG50 215/50 R17 99Q winter
36 Review
ORCISH 12V 13000-lb Load Capacity Electric Truck Winch Kit π with Synthetic Rope - Waterproof Off Road Winch for Jeep, Truck, SUV
35 Review