Review on 🔆 GETINLIGHT Dimmable LED Puck Lights Kit - Recessed/Surface Mount, Soft White 3000K, 12V, 2W (6W Total), ETL Listed - Pack of 3 by Rebecca Bright

Bought a set of three lights and couldn't be happier. Installation was easy and the lights are very bright. I chose to plug them into an outlet that I had tied to a wall switch so they could be turned on at the wall rather than using the built in switch/dimmer. I left the built in dimmer and placed it in the closet to allow for dimming. This set is in the bathroom and I expect the brightness to continue to increase. No lag issues from the moment you flip the switch and turn on the light. I would recommend these lamps. UPDATE: An Inlight representative was quick to respond and offer assistance with my unconventional issue regarding my second purchase of a six lamp set. As mentioned (and below), I chose to control the lighting with a conventional wall switch plugged into two outlets feeding sets of six and three lamps. To be clear, the 3 and 6 light kits work as advertised using the built in switch and dimmer supplied by the manufacturer. The lights come on instantly and the dimmer offers a good range of brightness options. After explaining my situation (see below) an Inlight representative worked with me to fix the issue and I fixed the lighting lag with 3 power cords and junction boxes. to power the headlights I installed. It worked flawlessly and now I can flick the wall switch and turn on the light with no problems. I can safely say that this was one of the most impressive customer service experiences I have ever had. Inlight took the time to understand my problem and help me solve it. They responded to me in a timely manner and provided a truly impressive service. Initial Review WARNING: For those wanting to connect a six lamp set via a dedicated wall switch: I have set up a six lamp set as described above for the three lamp set I purchased. There is a delay from the moment a simple wall switch is flicked with no dimming to the moment the light comes on. Aside from that lag, the lights work really well. During troubleshooting I removed the product's built-in switch/dimmer from the junction box and connected the light directly from the junction box to the LED driver's power cord. I had the same lag. I also tested individual bulbs through a three-bulb junction box from another set I had previously installed. All worked perfectly. It looks like the issues are with the larger 6-bulb junction box or the power cord with LED driver. (This issue only occurs when power is supplied to a wall outlet via a dedicated wall switch. Otherwise the factory supplied switch and dimmer will work as advertised.) This was unfortunate as the 3 bulb set worked very well with my wall switch design. I have emailed the manufacturer and will update this review if I have new information.