Review on MotoFab Lifts F150 1 5 Leveling Compatible by Lacueva Tranquillity

Instructions need to be updated. On my 2018 Ford F150 the lower strut mount is different from the current instructions which require you to remove the brake caliper and axle nut to lower the lower control arm enough to allow the lower strut bolts to be removed from the control arm. Once the stand is removed, the lower stand bolts must be removed to reinstall the stand using the Motofab spacer. These pins are pressed in and must either be pushed out or removed with a hammer. It was easier for me to put the rack in a vise and knock them out with a hammer. The bolts then need to be reinstalled after they're back in place, this requires a bit of close-range hammering. Everything can be done right if you don't hurry. Also, be careful with the vacuum hub on the axle shaft to avoid damaging it during reassembly. I found a good video on You Tube about this.