
The Himimi Retractable Air Hose Reel is just what I need to keep my air hose organized and always ready for use when needed. My 50ft air hose used to be just twisted into a loop and laid on the floor. Whenever I needed it, I had to turn it far enough to get into the garage. When it was done, it had to be looped again. I've wanted to buy a hose reel for a long time to make this job easier. This coil is ready for wall or ceiling mounting. The kit includes wall anchors that can be used for installation. I suggest mounting it on a stud as there is quite a bit of force on the coil during use and I would never trust wall anchors. The support bracket is heavy enough to hold well. The body of the reel is made of thick, durable plastic and is well made. The mount's attachment point also appears to be plastic, so I'm hoping it will last. Air hose connectors are not included as I would normally expect with an air hose. I am disappointed with the length of the lead hose. This is too small for practical use. If your compressor is a floor model, it cannot be connected to the drum if it is installed at an acceptable height above the ground. I had to hook up a spare line hose I had between the compressor and the roller line hose to make the connection. If you have a stand alone compressor, then most likely you have enough connecting hose. The coil is easy to work with. Once the hose is pulled out, a locking mechanism prevents the hose from being pulled back. You can pull it out further and it will lock at that length every time. The longer the hose is stretched, the harder it is to pull as you are working against the spring. To retract, pull the hose slightly, release the latch and it retracts. You must hold the hose to prevent it from hanging down and damaging the reel. If you don't deflate the hose before retracting, it will not retract fully. This is because the hose expands under air pressure and takes up too much space in the drum when it is wound up.

High Temperature Food Grade Silicone Tubing - 3/8" ID X 1/2" OD For Home Brewing, Kegerator, Wine Making, And More By Quickun Pure (3.28 Ft)
15 Review

Flexaust 231 Plastic Elbow Black: Durable and Efficient Pipe Fitting Solution
11 Review

Clear Plastic PVC Vinyl Tubing 5/8" ID X 3/4" OD 32.8FT Heavy Duty Industrial Grade BPA Free
14 Review

GeilSpace 6 Pack Of 3/4" Γ 8" Black Metal Pipes - Ideal For DIY Industrial Shelving - Fits Standard 3/4" Black Threaded Pipes And Fittings - Vintage Industrial Steel Pipe (Black)
11 Review

12V Brass Solenoid Valve, 3/4" Electric Air Valve For Water, Air, Gas, Fuel And Oil - Normally Closed By Beduan
10 Review

Upgrade Your Draft Beer Kegerator With The TerraBloom CO2 Keg Pressure Regulator - Dual Gauge Heavy Duty Unit With Safety Features
16 Review

Joywayus 5/8" ID Hose Barb Hex Union Brass Fitting Water/Fuel/Air With 10 Stainless Steel Clamps (Pack Of 5)
13 Review

DIGITEN DC 12V 1/4" Inlet Feed Water Solenoid Valve Quick Connect N/C Normally Closed No Water Pressure
14 Review