Review on 🔊 Denon AVR-X3600H Black AV Receiver by Kio Svyjok (levi) ᠌

Its pros: Before that, I had a Marantz 5009, but in the 4k era I decided to upgrade, I wanted to take Onkio, but during the pandemic they had a problem with supplies, as a result I took Denon and I don’t regret it a bit. Bought from Germany, came out much cheaper. In general, the receiver is good, the music plays well. I don't bother listening through Spotify. A Shield 2022 is connected to the receiver from the receiver, the video is output through the Chiq b5u ukf projector. In general, everything is fine, occasionally there are some small blunts, but usually on / off solves the problem. The menu is the same as that of Marantz, simply and without unnecessary bells and whistles, I don’t see the point in beautiful pictures, etc., this is a receiver and not a TV set-top box. My acoustics shakes well, but if you need high-quality stereo sound, then you need a stereo amplifier, in 90% of cases it will outplay the receiver. A receiver with great sound will cost a lot. Everything is fine in the multichannel, I did the Audyssey calibration, but still raised the low frequencies, after calibration they became very small. In general, the receiver is good, receive a signal, decompose the audio from it into my 5 channels and the video for the projector does an excellent job, in stereo (on 4k) you have to unscrew the knob by 70-80 then the acoustics open. Rarely, but firmware ates come - the Denon receiver does not throw. And what is convenient - you can connect bluetooth headphones and send the sound output to them. If you decide to watch a movie at night, and relatives need silence, then it is very convenient. Cons below: Periodically, for some reason, Zone 2 turns on. I have to turn it off with the button on the receiver. Still haven't figured out why this is happening. Price in 2022.