Review on 📽️ Delux Screens 110 inch 4K/8K Ultra HDR UHD Projector Screen - Active 3D Ready - Premium Fixed Frame with Velvet Border - US Based Business by Jerry Moody

I repeat the first review about the lack of detailed instructions. It would probably save a lot of installation time. However, the advantages outweigh the disadvantages. The material seems to be very good. After dimming the lights a few times and looking at the photos to determine the correct installation of some components I was able to walk away with a win and a very good product. I would give 4.5 stars but the option is not available. Free Tips - Assemble face down. There are rear support rails in the top and bottom frames that you must remove before assembly. Springs - Insert the plastic screen support rods into the screen; two for the top and bottom and longer ones for the sides. Starting at the top center, bottom center, and both sides, insert the spring into the inside edge at the center of the frame hook, side facing down. The spring roller must be used to retract the top spring hook into the mesh holes around the plastic grid support rods. Be sure to start in the center and work outwards for all frame supports. That will make the job easier. Rear Support Rails - Remove the pre-drilled screws from the top and bottom frames. Align the guides with the holes. They will appear for too long, but they are not. I installed one screw on each rail, one screw on opposite ends. Both guides have grooves on the underside for attachment under the frame. It takes about 1 inch of force to place a splint under the loose end of the frame. Now, once they're in place (phew!), insert the screw and secure it to the frame. The next rail will be very easy as it only takes a moderate amount of force to move the frame down about half an inch to snap it under the frame. The hard part is over now! Hang the screen with a second person after attaching the brackets to the wall. Otherwise one person's work.