Review on ❄️ Seal Out the Cold with Frost King Self Stick Weatherseal D Section by William Bell

I need a 3/8" wide x 1/8" thick exterior door seal and this is advertised as what I need. However, when the roll arrived it was actually 3/4" wide, not 3/8". Luckily I was able to cut the strip lengthwise down the middle to get the required 3/8" width. There are 2 narrow strips of adhesive tape on the back with a small space in the middle so I can trim to the correct width. On the Packaging also says it's 3/8" wide. Strange. But when I halved the width, the 1/8" thick strip matched my door panel perfectly, the only product I could find that wasn't too thick , so that the door could close and close properly. well glued except at the very top and bottom of the strip. As the product is rolled up quite tightly in the packaging, the top and bottom tended to unroll from the surface. A piece of tape solved this problem. so good but they should state the need to cut the strip in half to get the right width so the customer knows it is necessary.