Review on 🖨️ Eryone 3D Printer Filament: Enhancing Dimensional Accuracy of Additive Manufacturing Products by Patrick Matin

I wanted to try glow in the dark filament and I did it with Eryone. I've also used their filaments with no problems and with very good prints. I have an Eryone ER20 printer and am new to 3D printing. After about 3 days :) The filament thickness was pretty good when tested at different lengths and before and after changing the filament. I decided to make my kids name bearers and decided to try two color printing. The base, as you can see, is black, and the inscription is a glow-in-the-dark thread. My settings were 215c/60c 50mm/s with a layer height of 0.20mm. I also use Cura 4.8 for slicing and thread switch detection. After a test print to see if everything was working properly, I went broke. It took about 5 1/2 hours to print and everything came out fine. There were no issues with filament sticking, only multiple flushes needed to be performed during filament changes. Eryone PLA+ is also black. Kids love the glow, and with a bright flash, the glow is pretty strong even if it's not in the dark. You can see some images related to 'glow'. The one on my MacBook was also filmed in the kitchen with the lights on. I'll add more to my review after I print more stuff with this thread.