🖨️ Eryone 3D Printer Filament: Enhancing Dimensional Accuracy of Additive Manufacturing Products Review

Loved the filament but took a hell of a time getting the material to stick. After many failed attempts, I was able to complete the 13-hour print with no problems. This material prints just like PETG, not PLA. Temperatures shown may work when printing at 10mm/s. My first layer I used 15mm/s, the other layers 110mm/s wall and 120mm/s infill. I had to heat the bed to 85 degrees and then lower it to 80 degrees and 235mm/s for the first layer and 240mm/s for the remaining layers for the rest of the…

I was very interested in glow in the dark PLA and it exceeded my expectations. I was hoping to try a blue or red glow as I had never seen that before but was oversold and returned due to unavailability. However, this glowing green coil worked great! There were some excess rows initially, but enabling retraction in the stl slicing program almost completely solved this problem and made the cleanup/non-existent easier. Adhesion is excellent if you have an adequate layer of glue and the bed is…

I wanted to try glow in the dark filament and I did it with Eryone. I've also used their filaments with no problems and with very good prints. I have an Eryone ER20 printer and am new to 3D printing. After about 3 days :) The filament thickness was pretty good when tested at different lengths and before and after changing the filament. I decided to make my kids name bearers and decided to try two color printing. The base, as you can see, is black, and the inscription is a glow-in-the-dark…