Review on 🚘 Enhance Vehicle Safety with Standard Motor Products NS95 Neutral/Backup Switch by Philip Lindsey

perfect fit. Be sure to neutralize and not park the vehicle when installing, and align the mark before connecting and/or bolting. The package includes an extra connector, I think for another machine, and metal rings that I don't need. or for the 1993 Lincoln mark viii. I'm wondering if something is wrong because the check engine light has been on since installation, but it could also be related to the new connector wires installed today. This block should be better sealed than the stock but out of suspicion I will periodically apply as liberally as possible silicone grease lest water ever seeps into this little nightmare and downshifts me to 75 on acceleration. It wasn't fun. No camber and a flathead screwdriver are the only tools I needed once the car was on top. Do yourself a favor and spritz on some brake cleaner before you get covered in grease at work. It's hard to reach because the exhaust pipe is in the way of my car. I would be very unhappy without this ratchet wrench. On the left side of the car, under the driver's knees, you will find this at position viii. Tip for removal and installation; right hand on wrench, left index finger on screw head to keep it turning. Less screw waste. You can use ramps, but I used a 21" jack to raise the left side of the car (of course the airbag system is disabled).