Review on Upgrade Your Jeep Wrangler JK With LEDKINGDOMUS Front Bumper - Rock Crawler Style With Durable Winch Plate And Powerful LED Lights by Savoeun Ramirez

This bumper was higher quality than I expected. The packing was double boxed/stapled together, and the box arrived with no damage at all on the corners. the finish was very nice, with no chips or flaws. It is very heavy, and will take 2 people to mount it up comfortably. It looks just as good as any $600-$800 bumper, at less than half the cost. The bumper bolted up perfectly, with no vehicle modifications required.HOW TO INSTALL:1. Remove oem bumper (if you can't figure this one out, you better have someone install your new one.)2. Probably remove your muffler, which makes it much easier to get to the center install bolts later.3. You have 2 rectangular pieces which slide INSIDE the frame rails on each side. Those are what your SHORT bolts slide into. The short bolts will go from the outside of bumper, into those nuts on your special plate. Don't fully tighten down any bolts until all 8 bolts are installed.4. Then your other piece is for the center support near the tow hook. You have 4 longer bolts there for the center mount area. start those bolts half way or more.5. Finish tightening the center bracket first. which will make sure the sides are aligned nicely later one. Then tighten the bumper edges last.** There is a full install video in my 2007 Wrangler playlist on my YouTube channel LastHumansGarage. Subscribe. **