Review on 📺 BONTEC Height Adjustable Swivel Table Top TV Stand for 26-55 inch LED OLED LCD Plasma Flat Curved Screens - With Max Load Capacity of 99lbs, VESA 400x400mm by Richard Messar

There is no mechanism to tilt the TV up and down. And more than that. He leans forward! Automatically. If you look at the photo I took, this is their design to keep the TV from falling off the stand when you try to tilt it. It's a non-screwing screw into the mount that keeps the TV secure from too much movement. I spent hours assembling this TV stand because my 55" TV tilts forward and can't face the floor so I had to install Jerry and glue plastic spacers to the bracket. To get the incline level. But it's jerky and doesn't feel safe for the TV. I can't believe only one other review mentions this issue. The number of fake Revain reviews must be unrealistic. Because it is an obvious problem in the design of this TV stand that makes it impossible to use and get it working without spending a lot of time adjusting it with ingenuity. I don't know who came up with this safety mechanism with those floating screws, but it's horrible and they should be fired. If you tilt the TV up by holding it, you'll just push those screws all the way out of the mount as they're so poorly designed. I'm also a mechanical engineer so it has nothing to do with how I installed it. I installed them correctly. It's impossible to tilt the TV without gluing random objects to the inside of the TV mounts and hoping they stick and that you don't have too much of the TV's top layer afterwards.