Review on XKchrome LED Head & Fiber Optic Roll Kit With Bluetooth Control For Automotive & Home Accent Lighting - 6Pc Head/2Pc Roll, 6Ft, Mounting Tab & Advanced Features by Matt Tito

I installed these lights on my 2018 accord and everyone loves them. Dominiks review covers mostly everything about these lights so I will just leave some install tips and things I found usefull. 1. Take maybe a 6” piece or less of the fiber optic cable and get used to fitting it into corners. try different cuts of the mounting tab to get the cable to behave how you want for each bend you plan on using this cable for because yes the cable does bend but if your figuring it out with the whole strand you want to use you will end up getting slight cracks and when the light hits that part of the cable it will illuminate more brightly then the constant glow.2. When attaching the light head to the cable you have to remove part of the mounting tab (I used a razor blade) just be careful because if you cut into the round tube light will flood out of the cut especially when you bend the cable if you do nick it and don’t want the super bright light I found a sharpie along the nicked part does the trick this also works for the ends of the cable if you want less light shinning out just keep taping with a sharpie till the desired light is achieved.3.the cable can make 90 degree turns and slightly more than that however when doing this cut the mounting tab in a v so the cable can bend freely. The more aggressive the bend the less light comes through you might not notice a difference in light but the longer the strand and the more bends it will start to fade you can attach another led head to the other side to resolve this problem and always tighten that screw down it helps the light head not fall off over time with vibration from driving best of luck and enjoy your new lights!