👍 Piaa 94048 Silicone Wiper Blade Refill, 19-Inch - Get Superior Performance and Durability with this Pack of 1 Refill Review

It fits my 19" GM wiper blade snugly. I have a CTS V and it has a fancy wiper blade with a spoiler so finding a replacement is not easy. It there are two widths they make, 6mm and 8mm. My 22" driver side blade is 8mm. But PIAA doesn't reach 8mm width until the blade length is 24". The 19" blade has Both the GM and PIAA are 6mm in diameter so I'm not sure how to go about dealing with the 22" side. I could buy a 24" Piaa blade and cut it off but then could the metal stiffeners slipping out of the

Best Wiper Blades - No. Using closed window treatments means rain runs off immediately, and in lighter rain the wipers don't need to be used at all. My wife bought a new car and while driving it in the rain I realized how spoiled I was with the PIAA wipers on my cars so I bought the same ones for her car. The difference between day and night. Used them in winter with some etc and never failed. Expensive but lasts a long time. FWIW I use NuFinish polish on my screens with good results as it is…

I bought this to replace the passenger wiper on a 2005 Acura RL. I also replaced the driver's side blade with a 28 inch blade. It took some effort to take the old one out and put the new one in, but it was definitely worth it! on the packaging. Some reviews complain that the squeegee doesn't seat properly and/or the blade deforms/breaks. The metal frame is brittle, so I'd recommend pulling on the blade rather than trying to slide it through the guide (which I'm talking about would make sense…

Acura has these fancy wipers and I ordered a pair that says they fit Acura but don't fit. I looked on the Acura blog and a guy there swore by PIAA wipers for Acura. Consider PIAA 94048 and PIAA 94070. I have 19" and 24" blades and the blades are installed by removing the arm cover and removing the two screws that attach the wiper blade holder to the wiper arm. It is recommended to use a cordless impact wrench as these screws are tight! Once removed, simply separate the old wiper blades and…

A little background: We originally got these PIAA silicone blades for our Subaru Forester (2002 Model S), and they included the wiper blade bracket (the part that holds and connects the wiper on hand). That was almost three years ago, and it's only recently that the blades have lost their effectiveness. Now, when I say less efficient, I mean they're probably still better than most other wiper blades, but since using them we've become snobs! The wiper blades fit perfectly, and I already knew…

14 inch (rear glass) The 6mm wide PIAA replacement bit fits great although it was difficult to fit the replacement bit into the existing blade as Stops on both ends of the blade prevented the blade from slipping out. The replacement 24" PIAA 8mm wide bit did not fit as the lugs on the existing blade were 6mm wide. Not sure which blades are original. I ended up getting a 24" Rain-X Expert Fit Conventional -Blade for $8.50 at Wal**** which is 8mm wide and has a 24" PIAA thread fits great even…