🔧 Crackbond JF 311 by Adhesive Technology Corp Review

This product is easy to use and highly customisable. When he heals he seems very hard. However, due to the design, the tube is only half full. I didn't notice until the caulking gun stopped halfway. After reading the fine print on the packaging, I learned that this was done on purpose and on purpose. Just be careful when planning how much you need so you don't have to stop in the middle of an order and order more.

This is a good product and works well but the tube doesn't go far. If your cracks are deep, be sure to use putty so there isn't too much sealant. You cannot use this on inclined surfaces. As long as it holds up well. I'm afraid to see how she will survive the winter. Also, I find it quite expensive for what you get. In general it works. If you have a lot of cracks to fill, I would suggest looking for a cheaper alternative.

We used this to fill inspection gaps in a garage floor prior to flooring. The product is really good for filling those seams. After drying, it looks like cured rubber. A few things we learned along the way. Our cracks were maybe an inch deep and 1/8 inch wide. We had 720 square meters. foot, so about 78 feet of seams had to be filled. The product is very "thin" when it comes out and you will need to overstuff the seams a bit so it can be shaved off after curing to give a nice smooth finish. (We