🔥 AIYUNNI 10mm x 25M Thermal Adhesive Tape: Double-Sided Thermally Conductive Tapes for Heat Sink, SSD Drives, Computer CPU, GPU, LED, Coolers - Enhanced Cooling Efficiency Review

Received quickly. Worked very well. I used it as a heatsink and insulator for my GTX 1060 when I upgraded the heatsinks. Holds up well so far, no problems. This seems to help a lot in dissipating heat away from the board and components. I am very happy with its performance. The seller also appears to be actively testing to ensure my product will work for my needs. The roll came in a nice, leak-proof, protective, reusable packaging. The temperature of the circuit board, measured with a laser…

I used this to glue coolers onto my direct drive Eskate trucks. I ride on different surfaces, there is a lot of vibration and it stays in place. And it still offers good heat transfer, allowing the radiators to draw heat away from the trucks. I'm really impressed with how reliably it has worked.

False advertising. They intentionally use a misleading image to fool buyers. How difficult is it to photograph the real product? Avoid this abusive seller.

This product was purchased from the Peltier Thermal Cooling Test Lab for the purpose of transferring heat from one surface to another. Especially from the Peltier element to the aluminum cooler on the hot side. In laboratory tests, this product did not transfer heat from the hot side of the Peltier element to the aluminum heatsink. Instead of transferring heat, this product caused rapid heat build-up on the hot side of the Peltier device, resulting in catastrophic failure of the Peltier device.

Use for my stepper motors on my 3D printers. The "thermal glue" my radiators came with was a joke. That's why I bought this thing. So far so good, holds up well. I'll probably never use it much, but I'm glad I have it now.

Hopefully the adhesion and heat transfer properties of this tape will not degrade significantly over time. I covered the back of the heatsink with this product and then attached it to the hot spot on the back of the powered speaker. The tape transfers the heat to the heatsink very efficiently.

I bought this tape to stick the temperature sensor on the M.2. NVMe PCIe 4.0 as it heats up and I wanted my motherboard fans to run faster as the drive temp rises. The glue is very sticky but can reliably transfer heat from the actuator to the temperature sensor to keep the temperature below <70°C. to the bag.