Belltech 6406 Shackle Kit Review

Good product! You may need to cut a small piece of sheet metal under the truck bed to eliminate small rubs or cut out a small square on the truck bed. Slight modification and fits very well.

I bought these based on another review that said they would work in 2010 and they worked. I have used them in combination with a 2" front lower wheel so I cannot guarantee they will straighten the truck. They worked great on the 2010 Harley Edition AWD.

Easy to assemble and perfect fit and my truck looks exactly how I wanted it. If you are using this and removing the works block at the rear, be sure to order Specialty Products Company Transmission Pulley 86255 for the Ford F-150 - a pair as this eliminates the driveshaft vibration at around 25-30 mph which is thru causing the downshift. http://www.amazon.com/gp/product/B000SIAPSG/ref=cm_cr_ryp_prd_ttl_sol_11

I installed a 2005 f150 on the train. When I got into the project I knew I had to trim the weld under the truck bed a bit to find a gap that wasn't there and was a problem, but the new bushing wasn't exactly the same size as the factory bushing . I had to install a 1/2" washer between the bushing and the shackle hanger to ensure a tight fit. Overall a good product but there are better alternatives. Although the truck looks cool.

Overall a good product but there was a seam on the body of the truck that needed to be sanded down to clear the lugs to allow swinging freely while driving.

I needed to replace the bushings on an old cleat set I had installed. It was easier to just swap out the entire cleat. Very happy with this purchase

Good product! You may need to cut a small piece of sheet metal under the truck bed to eliminate small rubs or cut out a small square on the truck bed. Slight modification and fits very well.

Easy assembly and perfect fit and my truck looks exactly how I wanted it. If you are using this and removing the works block at the rear, be sure to order Specialty Products Company Transmission Pulley 86255 for the Ford F-150 - a pair as this eliminates the driveshaft vibration at around 25-30 mph which is thru causing the downshift. http://www.amazon.com/gp/product/B000SIAPSG/ref=cm_cr_ryp_prd_ttl_sol_11