🔧 Black Bgears 140mm Cooling Fan Adapter - Enhanced SEO Review

I ordered this adapter to attach to a 120mm CPU cooler. My CPU cooler failed and I had to order and install a new one. I ordered a new 140mm high speed fan from Noctua to fit between the rear case opening of a 120mm radiator to push air, so I needed this adapter. I have a fan in the radiator. For your information. They give you 4 fan screws but no mounting screws. I used #6 x 3/4 inch mounting screws and cut them to length. Works great. Doesn't rattle, fits perfectly.

Great for 140mm and 120mm, which is important. ". The packaging seems to say that you can only go from a 120 bracket to a 140 fan, not the other way around, but with a little thought during installation you can make it work either way.

Works exactly as advertised. Allows you to install a 140mm fan where you only have one set of 120mm holes in your case, but also works as a small cover. Some cons. understood why. (Note - they won't work side-by-side without changing artboards) The adapters are said to come with 4 screws, but the screws float freely in the box (no bag of screws) and the screws can slip out of the gap between the back of the box and the cover of the blister pack, which are only fixed with clips, allowing…

Anyway, the adapter works great. additional space is added by the adapter. Comes with four standard coarse thread PC screws. Another reviewer said that the adapter cannot be used in reverse. I'm not sure what they did, but you can use it to adapt a 120mm fan to a 140mm Just pay attention to the order of operations by attaching the 120mm fan before attaching the 140- Install mm side, otherwise the 120mm screw holes will be difficult to access (assuming you use standard PC screws).

This is a simple adapter that is easy to 3D print, but if you don't have a 3D printer this will do. This will make the fan a bit thicker, so make sure you have some clearance. Another option if you need/want to use a 140mm fan and only have mounting holes for 120mm is https://www.amazon.com/dp. /B00V62IP7G?psc=1&ref=ppx_yo2_dt_b_product_details This is a 140mm fan with 120 pitch mounting holes. No RGB, but it moves a lot of air.

When I was assembling my last computer, I discovered that the CPU cooler's heatsink fans are not cleaning the RAM modules on the motherboard. (This is a common problem with custom builds.) This allows fans to go from 140mm down to 120mm without significant loss of airflow. The finished device fits like a glove and meets specifications. GREAT SOLUTION TO A COMPLEX PROBLEM!

Used as a fan mount for an Area 51 R2 case as the actual mount is currently unavailable. The 140mm side fits perfectly between the mount attachment points and double sided tape works well. I set it to 120. Worked amazingly for my use case. The only problem is that the screw holes were too small for the longer screws I used, so I had to widen them a bit with a drill.