Bulk Packed Birchwood Casey Lead Remover and Polishing Cloth - Enhanced for Improved SEO Review

This stuff really works! I thought I had a clean bore after missing a patch of this lead remover. I was amazed at how much it had collected

Removes traces of powder from stainless steel turret and polishes without scratches. It still takes some good old elbow grease to remove burn marks, but it worked when no other cleaner could.

Just works. Used to remove 20 year old deposits from the front of cylinders on S&W. It's not that I haven't tried thinner and brush in the past. The cloth removes deposits with minimal effort. Highly recommended, but not for blued guns.

What I received was unpackaged and not even labeled like the advertised image. I received a dried piece of white fabric in an open/unsealed clear plastic bag. There was no label or writing on the bag. There was nothing on the clear box that was opened except for a sticker with item number B078HC37C7.

It takes a little scrubbing, but burn rings or lead deposits on a stainless steel revolver will disappear, leaving only nice shiny stainless steel. Doesn't change the finish as far as I can tell. Cut it into about 9 squares if you plan to use it multiple times. Cut this way (3x3). Usually one or two parts are enough for me to make a revolver more or less error-free. More economical than messing everything up.

My Toolcraft BCG had an ugly carbon deposit that I couldn't remove with any other solvent. After using a polishing pad, my BCG looks almost as clean as the day it was taken out of the box. I was shocked. I put it in a soft vise and polished it with a polishing cloth. Definitely recommend them for cleaning problem parts. I will definitely buy a few more of these.

It takes a little rubbing but burn rings or lead build-up on a stainless steel revolver will disappear, leaving only nice shiny stainless steel. Doesn't change the finish as far as I can tell. Cut it into about 9 squares if you plan to use it multiple times. Cut this way (3x3). Usually one or two parts are enough for me to make a revolver more or less error-free. More economical than messing everything up.

My Toolcraft BCG has an ugly build up that I have not been able to remove with any other solvent. After using a polishing pad, my BCG looks almost as clean as the day it was taken out of the box. I was shocked. I clamped it in a soft vice and polished it with a polishing cloth. Definitely recommend them for cleaning problem parts. I will definitely buy a few more of these.

As with other customer comments, the product came in nondescript packaging. I would have preferred it if it had come in a bag as advertised. I find it important that the manufacturer/seller presents himself and his product to the buyer in a professional manner. A bag without a description does not match. BUT, the product works very well as advertised and as seen in the video on You-Tube. Product presentation on 2, works as advertised on 5.