🧱 Bosch 2607017164 Piece Setter Masonry: Advanced Tools for Precision Masonry Work Review

This set made me very happy! It is more suitable for a screwdriver. For me, it fits perfectly into the case with the Makita screwdriver. In the comments they write that it can rust. Time will tell, but I think with proper care and maintenance will not rust. To extract the bits you need to get used to (as shown in the figure). I recommend.

I removed the unfinished heads and instead put adapters on normal heads in order to make friends with a screwdriver with a normal set of heads. I cut the case and put this set and a set of drills in it. Now everything is in one place, happy ). As promised, photos in the app!

My personal experience with it.Convenient storage box, Stylish design, Nice set of attachments, Wish there was more magnetic attraction

I love when everything is in one place (it lies in a case with a screwdriver) Everything is convenient in the kit, the quality is high. I recommend.

Bosch, as always, everything is thought out! The case is small in size, the cue balls are located so that it is very convenient to get them even with one hand. Husband is happy!

Good set for home. Over the weekend I assembled a kitchen for myself - good quality bits, I did not find any attempts to "slick off".

Sharing my usage observations.Some pros: Convenient and durable case, many different bits. Has cons: Plasticine bits wear out instantly if you use them.

Honest opinion on this product.Pros: bits that without adapter are of very good quality Its cons: small bits of very low quality, get lost almost immediately

Excellent set, bits are easy to get, the collet quick release is well centered, there is practically no runout. For complete happiness, only medium beats are missing, long and short are available.

I hope that the work will not let you down. Reviews vary, I haven't tested it yet. Whether they will wear out and rust quickly, only time will tell.

It all started with the fact that I saw such a set at work, held it in my hands, tried a few bits, and decided to purchase the same one for household chores. The case is good, the plastic and rubber are of normal quality, the latch is simple and trouble-free, the bits in the case are fixed, the principle is simple, there is nothing to break. According to the functionality of the bits, this set is enough for any work.

Two sets of Torx - T and Th, although it would be more logical to T + and Th or expand the Hex and SL set. Magnetic heads with a protruding magnet - if the screws have a relief marking in the center - they hold worse. The box itself could be polyethylene and not fragile. The beat bays are not swappable like Milwakee etc. In general, there is a place for Bosch to work, if it weren’t for the promotional price of 1600, I wouldn’t take it.

The set is awesome. Satisfied, proved to be worthy in operation, all the bits are made with high quality, a large selection, I took it for a Bosch electric screwdriver. Everything fits perfect

I didn’t understand why an extension cord with the BOSCH inscription is needed - it simply shifts the outer case forward, covering the bit. But as an extension - excellent :-)

The goods arrived quickly, I really liked that such a large number of bits of good quality and relatively inexpensive, the bits in the case are very tight, do not hang out, the case closes well. I checked only two bits in operation, only a positive effect! Pros: A good solid case for storing bits, everything lies neatly, nothing dangles! The beat quality is good! Different cons: The only minus, not even a minus, but a tiny drawback is the lack of magnetization of the bits.

If it cost 1k - a normal set. In any case, if you constantly use the set, you will have to buy and change bits as they wear out. Suitable exclusively for home use, where the set will lie in the toolbox most of the time.

This set is worth the money, you can use it both in everyday life and professionally. The quality is excellent. I've been using Bosch sets for years and they never let me down.

This is not BOSCH, this is Chinese crap. With this set, only computers can be disassembled, but why overpay for a brand? It won’t even work for household self-tapping screws, it licked off the edges of the ph2 bit on the very first self-tapping screw, screwed the bison with an old bat and even stronger. The case probably costs half the cost of the set, it would be better to save money on the case than on the quality of the bits. But how it sounds - BOOSH, ugh . It's a pity you can't post a…

Great set, albeit a bit big. But you will not regret it, the quality of the metal is excellent, so far not a single nozzle has been shy.

Has some pros: I really liked how the case was made, and the bits are also very convenient Different cons: bit holder for self-tapping screws with a retractable sleeve wedged, but does not affect operation