Bundle: Bracket 3 Cup Set & 6 FT Power Cord for Beltronics & Escort Radar Detectors (Accessory Bundle) Review

Really like this much better than the "two cup" mount it replaced. Kept my detector much more stable than the two cup, even in rental cars that use a cleaner on windows that make it hard to stick. I use rental cars frequently and, almost always, had trouble when first trying to stick the two cup versions in place. They would frequently let the detector slide, or fall. The 3 cup versions hangs tight, but still easy to remove when it's time.

Bought this cord to replace the stock curly cord on a new Escort X80. If you have a long, raked windshield, ie: CR-V, then there will be a long distance between the bottom of the windshield and the accessory power outlet. This cord takes the stress off the power port and plug by letting it hang freely.

Bought this for my Uniden R3, the plastic tab on the factory cable broke off so I needed a replacement fast. So far this powers my R3 fine and I have not experienced any problems. The plastic tab on this is a lot more durable than the factory cord.

This holds the radar detector securely in place. I did not use the two suction holder that came with the radar detector because I heard it tended to come loose so I cannot compare this to the two suction holders. But simple logic would suggest three suction cups are better than two. I have had good luck and no slipping or dropping with this holder.

The one I replaced had only 2 suction cups and it never stuck to the window. This one has 3 and it sticks just fine. The cups may be difficult to adjust.

This adheres to my windshield as if by GLUE. I had to slightly modify the phlange so that it would have a little resistance from dislodging from my Beltronics detector. I simply use needle-nose pliers to slightly bend the corners of the phlange and thus it had better purchase to stay in place. I highly recommend this if you are looking for improved adhesion to the glass.

My passport detector came with a crappy suction cup that kept falling down. I got one of these and it sticks like glue. Now I’m ordering more for our other cars.

As others have said, this should be the standard mount from the factory if not using a blendmount on your rear view mirror

Worked perfectly for my Escort radar detector mounted on my windshield of my RAM 2500 truck. I had to bend the piece that connects into the radar detector so it would aim level down the road. Simple fix and held exactly where it needs to be. The suction cups are holding very well. Its been on about a month now and it's winter here in NY not one slip or drop off. Highly recommend.

The three cup sticks better, thus longer, than the large single cup or two cup that have failed at two and three months during occasional rough-road driving. . Even if one three-cup mount were to fail, the other two cups would prevent abrupt fall and could be reapplied as before. Now at about three months the three cup is firmly attached in comparison to the large single cup or two cup applied before. I predict the three cup will adhere considerably longer, and can be reapplied more easily…

My original kept mount kept falling off the windshield. I bought this and another one. The other one had one large cup with a lever so that it sucks out the air and sticks firmer to the windshield. I prefer this one as it is less obtrusive.

Bought this product for the Escort in my daily driver to replace my original bracket. I'd replaced the two suction cups that came with it originally and decided that I would just replace it with this item, as it had three cups unlike the original. The two cup version tended to slide around as the windshield got warmer. This three cup version works perfectly. Not only did it fit the Escort, the three cups hold TIGHTLY. Liked the item so much, I ordered another one for my Vette.

I used this with my escort x8500. It fits great and the metal can gently be bent to make your radar level. I live in Florida, so the third suction cup is great especially on summer days when the original escort mount would fall in high heat.

I have several cars so extra radar mounts I can move he radar detector around between cars without removing the mounts. The three suction cups hold firm. and I can leave them in place and simply slide the detector on and off.

This works much better than the original 2-cup design. No flopping while driving or popping off when it’s too cold or hot. This alone makes it worth the price because your radar can fall and break with the supplied mount.

Unlike the standard 2-cup version that comes with most of the Escort and Bel radar detectors, this one actually stays stuck to the windshield. I have had one of the three cups come loose exactly once, but with two cups still firmly attached, my radar detector did not immediately fall to the dash and then to the floor.

The suction cups are bigger than the stock mounted ones, which is great. My stock feet were giving out, this was a nice touch with 3 suction cups. So far no issues. I did need to been the bar to adjust the angle of the radar, but that could be the way my window/dashboard are. But bending it had no ill effect and seams very sturdy.

The one I got with my V10 a year ago had quit holding the unit up. This new one wasn't holding the unit up for long. I removed the center suction cup. Still had problems. Folded a piece of paper, inserted it into the slot, put unit on form and folded the other part of paper over the top and pushed it in. It hasn't fallen off since.

If it's greet on my escort no longer does it fall down due to the heat because I live in South Florida. Nice design three suction cups make a huge difference I would definitely recommend this product.

3 suction cups are better than 2 and this product fits my old Redline but it only sticks marginally better than my stock 2 suction cup model. This product is better but I do feel a little let down. Part of my problem might be I live in the northeast and my windshield is often cold. If I get frustrated enough my next move will be the single large suction cup model.