Broan-NuTone 423604: 36 Inch Stainless Steel Under Cabinet Range Hood Insert Review

If I had known the underside looked like this I would have ordered something else. But the ventilation itself works perfectly. I just don't like the look.

We bought this hood to replace our old white one. After checking out Hallows and other stores I checked out Revain and found this hood at a better price. It was extremely easy to install. Keep in mind that you may need to make a slight modification to your vent if it is smaller than the hood. I would recommend while you've disassembled and disassembled everything that you replace all of the tape (if any) with new tape. This will save you time and money in the future.

Broan 42000 Economy Series Range Hood installed today. I removed the Nutone Economy ventilated hat from the late 80's. The vertical exhaust cutout needed to be moved forward about 1/2 inch using the new vent as a template after removing the fan motor and marking the cutout through the flange from below. The mounting screws actually matched the existing holes. The wiring cutout matched the old vent. I am happy with the performance of the new vent and the look matches the stainless steel upgrade…

This range of hoods was bought 2 months ago for a home renovation project so they stayed untouched in the packaging until we were ready for that (which means that I have my 30 day window to get it back). Installed yesterday only to see the light works but no fan/motor. The electrician confirmed it has a bad motor even though it's brand new so it's basically useless until we put a new motor in or buy a whole bunch of range hoods. Talk about disappointment! Contacted the manufacturer directly to…

DIY kitchen renovation. Both my husband and I installed it together, it was a fun project for us, we laughed and shared some thoughts and events in memory. We needed this time together as a couple after 16 years of marriage. The little girl laughed at us as Bill used the drill and I held the hood. However, the first one I ordered was dented when I unpacked it. But it was a quick and easy return to our local department store, Kohl's. And the other arrived within 7 days. It was installed for…

Great hood! They helped me install it and the only problem they had was that the location of the drain holes had changed quite a bit in 20 years. My house was built in 1962 and the last time the hood was changed was around 1997. The hood opening has moved to the front. about a half inch on this model, so it didn't match my air duct until my installer next door trimmed the exhaust hole about a half inch. Luckily he had a puzzle! The end result is great and I'm still glad I bought it. It's nice…

Overall a great product for a great buy. Not noisy at low or high frequencies with excellent ventilation and therefore serves the purpose. 2 negative points are minor and can be easily fixed: 1). The instructions can be simplified and the "TOOL LIST" should include cable connector covers.2). LUBRICATION OF THE "GRIP" SHIELD curves or curves inward toward the fan and contacts the fan, preventing the fan from spinning which could cause the inexperienced installer to come back. It is highly…

When I first got it, it fit nicely in the old Frigidaire hood space carved into the cabinets. This is a rental for my dad so I didn't install anything more expensive. owner installed. I was concerned it didn't seem to increase steam and cooking fat as others reported, but it was acceptable. Now the fan stops working although the light still works. The owner says the fan switch is defective. This hood is not used often as my father has nurses who constantly prepare simple meals for him. The hood