Cable Atcom CEE 7/7 - IEC C13 (AT10119), 1.8 m, black Review

The convexity of the plug is exactly the same side as in my photo and as in the third picture of the product here. I want to draw attention to one good old proverb of future buyers - "Measure a hundred times, cut one. " And you will be happy! Look at the photos of other buyers. Seller success in sales! Well done does not wind up ten times like the rest!

I bought it with an angled connector specifically for a laptop power supply, since with a straight connector in a backpack, when carrying it, the wire was very bent and could be damaged, and also interfered and protruded in a backpack.

The product is good, there is no dispute, just what to do with it now? Connected is called an aesthetically pleasing cable, now it sticks out like a mad cow's tail up!

The wire is pretty soft. Will do. It was important to me 90 gr. Ugol connector. And I needed the left corner as in the photo of this product with the article number AT10119 in all online stores. But the corner of the connector turned out to be right. Consider in the work, if this moment is important to you. It's sad, however. But the left one has not yet been found in stores. Obviously, the article with the left corner of the connector will be different. I will use this for now.

The cable was turned in the opposite direction. Money thrown to the wind. Apparently, people have been outraged in the reviews for a VERY long time. But the seller doesn't care.

Its pros: Very handy wire, very good for TVs that hang close to the wall With its cons: when it arrived, the plug was broken, but it's good that there was an old wire, and one of the two turned out)))

wire with a cross section of 0.75 mm. Before buying, I advise potential buyers to go to the atcom website and see a picture with the correct direction of the connector bend. The picture on the market is wrong. Some pros: works. sits tightly in the power supply connector, does not play. allows you to put the case of the system unit in a tight wall. Got cons: copper plated aluminium. I would like the wire to be copper, since this company has other models with copper.

I bought for an office printer, my own was lost, this one came up perfectly. With a straight plug, do not put it there, the duplex tray does not close.

I recommend to buy. Has pros: Good angled cable. For this price, an excellent choice. Sometimes you really need one to move the equipment close to the wall. With its cons: The cross section is probably small - judging by the total thickness.

There are a lot of comments on the topic of the left and right corner of the C13 connector, pay attention to the photo of the product - in the first two photos the corner is left, in the last photo it is right. I ordered from NIKS, the right corner came to me. It doesn't matter to me, it will fit in any direction.

Sadly, I didn't see the reviews till after I had the merchandise. It was critical for me, as well as certainly for anyone who purchases a cable with an angled connector. Because it lies against the wall of the gadget, I am unable to even insert this wire into the connector of the equipment for which I purchased it, making it useless to me. It's merely repulsive.

Has pros: Angled cable, you can put the device much closer to the wall. The cable itself seems to be good. Has cons: My copies in my devices are rather weak, I had to pick it up with a screwdriver and bend the contacts.

The cable arrived, which is in the last photo in the product description. I stuck it in a monoblock, now nothing sticks out from below. Later I will buy a suitable fork and shorten this gut, because twists, coils and any sticking nonsense are infuriating. Thanks to the reviews and the seller who posted a photo of the wrong cable. It is a pity that St. Petersburg trade is the worst in the country, even large retail chains are not able to monitor the market and have demanded positions in…

Unfortunately, I read the reviews only after receiving the product. For me, as well as, probably, for anyone who buys a cable with an angled connector, it was important which way it turns. As a result, this wire turned out to be useless to me, I can’t even insert it into the connector of the equipment for which I bought it - it rests against the wall of the device. It's just disgusting.

Very well attached to the printer, standing in the corner. Due to the turn of the plug, the cable is completely hidden in the niche of the printer and does not eat up the space between the printer and the wall.

Electricity is the science of contacts. This cable does not create a contact - the sockets do not touch the contacts of the counterpart. Pressing the plates has not yet led to the desired result - the contact is constantly torn, but has led to a loss of presentation. The inconvenience of turning in the other direction only exacerbates the matter . The useful length has decreased by 15 centimeters. Decided to use it on kitchen appliances. It turned out that the cross section of the veins was…

Has pros: good cable, does not fall out and keeps well in the socket, soft and shiny Some cons: smells a bit of insulation, but does not work as an indoor fragrance.

Normal power cables, for PCs, kettles, thermopots! And Chinese home appliances with Ali! Short at 1.2 and 1.8 m. Most of all, for household appliances that you have on the kitchen worktop. But you can buy longer ones by 2 and 3 m. ) I bought on Ali in Chinese stores - An electric stove - a pan with a non-stick coating + Steamer on it Cook and Fry, you can also cook for a Steam. And in order not to use Chinese adapters for European sockets - I bought these power cords ! Perfect fit! How…

Has some pros: good cable, does not fall out and keeps well in the socket, soft and shiny Has some cons: smells a bit of insulation, but does not work as an indoor fragrance.