Header banner
Revain logoHome Page
💨 sata chassis fan hub: efficient 8-way cooling splitter controller for pc desktop motherboards (12v 3-pin pwm) logo

💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM) Review

4

·

Poor

Revainrating 3 out of 5  
Rating 
2.8
🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(4)
img 1 attached to 💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM)
img 2 attached to 💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM)
img 3 attached to 💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM)
img 4 attached to 💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM)

Details

BrandGELRHONR
Compatible DevicesDesktops
Item Dimensions LxWxH2.13 x 1.93 x 0.75 inches

Description of 💨 SATA Chassis Fan Hub: Efficient 8-Way Cooling Splitter Controller for PC Desktop Motherboards (12V 3-Pin PWM)

✪ SATA Cooling Fan Splitter Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. ✪ Suit for 12V 3Pin fan (8 channels).Using SATA interface.Support the fan operation at the same time, solve the lack of motherboard interface, and focus on processing the fan wire. ✪ Built-in double-sided adhesive: This compact HUB easily fits inside your pc case. It can be used to fix the hub in the chassis. ✪ 8 way without speed measurement and PWM function, you can manually adjust the gear position, start the fan at full speed (LOW) or low speed (LOW), or turn off the fan. ✪ EASY INSTALLATION:It is very easy to setup. Connect your RGB items to the hub, connect the included cable to any pin on the hub then connect the other end to any RGB header on your motherboard and lastly connect a SATA cable from your PSU to the hub to provide power.

Reviews

Global ratings 4
  • 5
    1
  • 4
    1
  • 3
    0
  • 2
    0
  • 1
    2

Type of review

Revainrating 1 out of 5

Perfect Computers & Accessories

A simple plug and play hub that is very easy to use in seconds. Good quality, but the manufacturer must specify the dimensions and characteristics of the maximum bushing limits.

Pros
  • ✪ Built-in double-sided tape: This compact hub fits easily into your computer case. It can be used to fix the hub in the chassis.
Cons
  • Contact Seller

Revainrating 5 out of 5

Works well only when connected to SATA power.

Good quality for what it is, although the SATA power seat was very tight very little dielectric grease needed to be smeared on it to turn on the SATA power. Works perfectly.

Pros
  • ✪ SATA Cooling Fan Splitter Suitable for 12V 3-pin fans (8 channels). Using the SATA interface. At the same time, support the operation of the fan, solve the lack of the motherboard interface, and focus on the processing of the fan cable.
Cons
  • Hard to say

Revainrating 4 out of 5

Incorrectly connected. - Internal components

I had the same problem with two of them where the system wouldn't turn on in sleep mode. I thought the first one just had problems, but when the replacement did the same, I checked the wiring. I have found that the unit is fine in high power mode as the 12v power is on pin 2 of the fan which is power and ground is connected to pin 1 which is ground. However, when going into sleep mode, 12V is applied to pin 2, leaving 12V but changing pin 1 from fan to 5V instead of ground. I tested this using…

Pros
  • ✪ EASY INSTALLATION: Very easy to set up. Connect the RGB elements to the hub, connect the included cable to any pin on the hub, then connect the other end to any RGB connector on the motherboard, and finally connect the SATA cable from the power supply to the Hub on to deliver power.
Cons
  • little things

Revainrating 1 out of 5

Does not work for speed control

Speed control not working. Mine only worked as a hub and the fans were running at full speed. I saw another review that said they had the same problem.

Pros
  • ✪ Suitable for 12V 3-pin fan (8 channels). Using the SATA interface. At the same time, it ensures the operation of the fan, eliminates the lack of a motherboard interface, and focuses on the processing of the fan cable.
Cons
  • Updates