I bought after 16 years of using Interskol dp235, I wanted a compact and lightweight tool. The price at the time of purchase was 10994. Impressions from the first use are excellent, there is sawdust blowing from the cutting line, backlight. In general, the cutting of the board is under full control. The only remark would be a cord long as on perf 2450, then there is nothing to complain about.

Despite the fact that this is China . the saw is made soundly, not on the belly, as they say . I bought it for sawing OSB3 sheets, plywood and laminate . sawed about 45 meters of OSB (9 mm) and 25 - 30 meters of plywood 12 mm. I bought a Makita B-04597 disc and a Dewalt DT1957 Construct disc. it's a pleasure to work with these discs. I didn't cut the tree lengthwise, for this I have a circular saw. but I think this saw can also be cut lengthwise. . power allows. the main thing is to choose a…

Pros below: Reliable! The old one served more than 6 years of professional work withstood (did not lie in the closet) Cons below: No! The old one broke, the bearing smashed into the hulls and smashed everything there!

originally drank och. I liked it, but: the second day of work - because of the short protective casing, I cut the cable (I put the saw on the floor, there was enough inertia of the disk - the cut of the cable is beautiful better than wire cutters), which deprived myself of the guarantee. And it would come in handy: a month of non-intensive operation and the gearbox made noise, as a result of a destroyed bearing, the cutting accuracy disappeared. While standing on the shelf - waiting for repair.

I would recommend her 100% With its pros: An excellent saw in all its aspects! everything is fine with it, the disk itself cuts well, and the handles both fit perfectly, and the flashlight, that is, the sole is of high quality, the wire is long, it keeps the speed well even with a damp beam. But. Some cons: the kit comes, like in many other models, with a guide for two bolts to the sole. Same for emphasis. She has no metal, in terms of ratio to the weight of the saw itself, even without…

In general, only positive impressions. With its pros: What to write here?! These options are the best choice. The price, reliability and accuracy of makita, the power and diameter of blades with good cutting depth, both straight and at an angle, adjustments with knobs and scales. Its cons: Unless the presence of standard devices for installation in a table (upside down))) is not developed. But there is someone who can do it, other models and . the Internet. A! and the cable is only 2.5 meters…

Pros below: Nice circular! Cuts and cuts softly. Satisfied! BUT NO WARRANTY CARD! Got cons: For such money it was possible and a case in addition! But this is more my opinion than a disadvantage !

Some pros: Excellent circular. Many additional functions such as cutting thickness and cutting width. With its cons: Probably the price. But for example, if you pay with bonuses and certificates, you get a good discount.

In general, the tool is good. I don't plan to install it on the table. Buy a tire adapter for the cost of half a saw, too. It's easier to make your own tire. I don’t see the point in installing a soft start for myself, the jerk doesn’t bother me. Everything is subjective. For a price of less than 11 thousand, I think that the purchase justifies itself. Its pros: The saw is excellent. Lies comfortably in the hand. The choice was due to the size of the saw blade and power. And of course the…

it's time for them to reconsider the guarantee Pros below: worked as a saw for three months, nice! top, bottom (drilled the sole, sawed like on a table), from the side (used it as a milling cutter), everything was just fine, almost didn’t give a smoke break, it’s just nice to work Its cons: until winter came, and with it force majeure, frost left it in the workshop (cold) spring came, now I think I’ll drink, but there was a counteraction for every action: I take a board 50 mm (aspen) I saw half

Makita has long gone down in quality and warranty much worse than the Chinese noname. The first time I got with a screwdriver, in which the first battery died after three months, the second after six months, while working as a shurik for a couple of days, kept it warm, and it turned out that the battery warranty does not apply, buy new batteries a little more expensive than the shurik in the case included with batteries and charger or wipe your warranty. After that, the Makita brand died for…

The saw is very good, I even tried to dissolve it with a native disk along the fibers to the maximum depth cut, it cuts without problems.

I took it for the dissolution of oak boards, even at a voltage of 160-190V it cuts oak 50mm and does not strain. Due to the large weight, it is not very convenient to work with one hand, so I put it on the table, it turned out to be a cutting machine. The lighting doesn't make much sense. The saw really lacks a soft start, at the start it jerks decently even when it is installed on the table, so I ordered a soft start for 300, put it in an extension cord, now the saw is aging normally. I am…

I have been using it for the second year now, I sawed through not a single hardened screw, while all the teeth on the disk remained intact. The power is enough for the dissolution of the fiftieth raw leaf tree, nothing more difficult to saw was necessary. For smaller or finer work, it is worth taking a closer look at models with a 190 disc, as 5 kg makes itself felt. People often have the question of whether to take a saw without a soft start and a riving knife. My experience with this model…

Some pros: Everything is fine, and the depth, and the quality of the cut, and the speed. Got cons: A little heavy, but it's not critical. It would be nice to make the power cord longer.

Took for installation in the table. Until we get around to making a stationary circular, the heat will come, I’ll unsubscribe. But, I manually sawed a 50-piece pine board, like clockwork.

I will take another one, too, under the stone. Different pros: Used with modifications as a stone-cutting machine with water. easily tolerates a diamond 230 disc. cutting at an angle up to 60mm. almost no heat. magnesium sole does not rot. reducer and hems until native 4 years (there is a protective cover). reliable indestructible device. Cons: the casing is machined from the inside with an abrasive, protection is needed. lift lock is weak, finalized. there is no start button latch (probably…

I have been using it for more than a month, I have already managed to make repairs in two rooms with a total S 77m2. It is a pleasure to work. The only drawback is that there is no soft start, but I bought a chip for this, it remains to be installed in an outlet and it will be fine. I managed to take it before the price increase for 11500, delivered in 2 days. I advise everyone!

For the first time in my life, I decided to save money on an instrument, and after almost 12 years of use and a burned-out Black and Desker, I bought myself an Interskol, it was my mistake . For three years of use, I gave it in for repair 2 times . Last week it broke down again and I decided to buy something that I had been looking at for a long time, but the price . Okay, I got it! After the purchase, I immediately tried it - heaven and earth ! Get it you won't regret it. In the first photo, I

Has pros: A powerful saw cuts like a hot knife through butter. In low light, the backlight really helps Different cons: A couple of teeth fell out on the disk, but it was my fault I didn’t notice the screws in the boards