Sealegend Dryer Vent Cleaner Kit: Powerful Vacuum Hose Attachment Brush for Lint Removal - Ideal Washer and Dryer Vent Cleaning Solution (V1-Blue) Review

To clean my hair dryer the paste uses a 1/2 rubber hose and has a hanger glued to it. It worked but was constantly clogged. This installation has just the right oval shape. It did not clog from heavy lint after cleaning. A few tips to get the job done. The brush, as in the photo, is useful for removing lint. Remember that these are the pile layers that will stay wet. Also, a piece of dowel or stick to clear the area and a flashlight. I bought an Oreck vacuum and it worked really well with this…

We had to replace an old vacuum hose that was used to clean our dryer; and after much comparative shopping and reading reviews; We chose the BoxLegend Dryer Lint Vac (V1-Grey). We were very surprised by the excellent quality of the vacuum nozzle; especially for the price we paid. And it works great on our dryer; and much better than expected. In addition, the same tool can be used in other places, such as under the fridge (we tried it there too). There are just so many other uses. Thank you…

First of all I don't know how to rate the suction power because it depends on your vacuum cleaner and not on this article so I thought. Second, I didn't need a flexible hose for my dryer because you don't get far, so a detachable rigid hose would have sufficed. I was pleased with the accuracy of the work done. Haven't done the outside ventilation yet because it's raining but I expect it will do the job, especially since my vacuum is pretty good! *chuckle* Other uses I found the solid hose to be

I decided to try this product to see how much dust it could remove from my dryer and I was blown away! The long nozzle does a great job of getting to places I couldn't otherwise reach. This area in my dryer has probably never been cleaned. Tip: When vacuuming, I noticed that the suction power had stopped. I found that the dust was so dense due to years of compaction that it got stuck in the hose. After I removed it, everything worked fine again. After I finished cleaning the dryer, I went to…

My old dryer fan was for a very large vacuum hose. When I wanted to use it I had to get our dryer out of the garage and lug it down to the basement to use it. Needless to say I only used it once. such a pain This flexible elastic hose barb is great! It fits my standard vacuum and my small vacuum carry hoses with a nice snug fit for both. Thanks to the long flat hose and the extra crevice tool, I had no trouble accessing the dryer's deep pockets of lint. I think this would also work under my old

I wasn't sure which version to buy because the descriptions weren't very clear. I know I didn't end up with a senior staff and that may have been my downfall. I finally used it yesterday to clean my dryer nozzles. Fits well in my vacuum cleaner (shark). As for the stack, it worked, but not very well. I don't know if this is exclusive to my dryer, but it was a really bad entry angle and from there I couldn't twist the hose to fully remove all of the stuck lint. So I cleared a path under the lint

I clean my screen pretty well every time I run my dryer and in the past I've stuck my vacuum's narrow nozzle in the space behind the screen as much as possible, but since it is not flexible so I could only get it at short range. When I saw this extension I wasn't sure how well it would work, but it's a tiny hassle so I decided to give it a try. Well, on the first "dive" into the depths of the dryer, my vacuum immediately made that horrible "hose clogged" noise, and I pulled out the extension…