Header banner
Revain logoHome Page
cooler master mcb b511d kann s01 mb511 computer logo

Cooler Master MCB B511D KANN S01 MB511 Computer Review

2

·

Excellent

Revainrating 5 out of 5  
Rating 
5.0
🎒 Computer Cases

View on AmazonView on ЯM

Media

(4)
img 1 attached to Cooler Master MCB B511D KANN S01 MB511 Computer
img 2 attached to Cooler Master MCB B511D KANN S01 MB511 Computer
img 3 attached to Cooler Master MCB B511D KANN S01 MB511 Computer
img 4 attached to Cooler Master MCB B511D KANN S01 MB511 Computer

Photos by authors

(3)
img 5 attached to Cooler Master MCB B511D KANN S01 MB511 Computer
img 6 attached to Cooler Master MCB B511D KANN S01 MB511 Computer
img 7 attached to Cooler Master MCB B511D KANN S01 MB511 Computer

Details

BrandCooler Master
ColorBlack
MaterialAcrylic
Cooling MethodWater, Air
Motherboard CompatabilityATX
Item Weight6.46 Kilograms
See 3 more

Description of Cooler Master MCB B511D KANN S01 MB511 Computer

FINE MESH FRONT PANEL - Designed for demanding gaming systems, the front and top panel employ a fine mesh to ensure high-volume airflow while filtering dust. MULTIPLE FAN AND RADIATOR CONFIGURATIONS - Front: 3 x 120mm, 2 x 140mm* fans, and up to a 360mm radiator with a maximum thickness of 50mm excl. fans. Top: 2 x 120/140mm fans and up to a 240mm radiator. Rear: 1 x 120mm fan and radiator. EDGE-TO-EDGE TRANSPARENT SIDE PANEL - Showcase your build through the lightweight acrylic side panel. EXPANDING THE POSSIBILITIES - Spacious interior layout accommodates standard form factor ATX motherboards for gaming needs (Mini-ITX, Micro-ATX, Standard ATX). MAIN COMPONENTS CLEARANCE - Supports CPU coolers (air/liquid) up to a height of 165mm, graphic cards (GFX) up to a length of 410mm and power supplies (PSU) up to a length of 180mm.

Reviews

Global ratings 2
  • 5
    2
  • 4
    0
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

I'm amazed! It was definitely worth the money!

For a long time I was choosing a new case for a video camera (which, in the end, I did not have time to buy an omegalyul). I looked through a bunch of options, and settled on the Cooler Master MB511. I liked the look and not bad in terms of functionality! But there is a nuance, I snatched it for a penny on ebay, moreover, a new one in a box (2.000r), no matter what they say, but for that kind of money, there is nothing at all! The main task of the case is good ventilation, it should fit 3080, 4

Pros
  • Large and spacious case with good ventilation, removable grids, 2 places for ssd on the side wall and 2 places on the top of the tunnel, carriages inside the tunnel for ssd or hdd (moreover, it was done quite conveniently, you can install hdd on top and on the back of ssd) , the ability to comfortably lay wires (although to be honest, almost back to back, if done beautifully), side glass (plastic), neat look!
Cons
  • Two usb ports on the front panel, for some it may not be enough. 1 blower fan (but depends on configuration). There is no mount for the drive (suddenly someone cares). Not a very convenient place for a power supply unit, since the wires are back to back and it is difficult to remove it from the case. Sufficient ringing button to turn on the PC. (but backlit)

Revainrating 5 out of 5

An ideal product for any type of consumer.

I took the case instead of my old one - Centurion from the same CoolerMaster. It had much more weight, and correspondingly thicker metal, but the difference is not so significant. In general, the case was satisfied. I put 5 for excellent airflow, so the rating would be 4. From the entire MB line, I advise you to take the MB511, because. the perforated front end does an excellent job of forcing air into the hull. Other models may have problems with air intake. Side and bottom perforation for 3…

Pros
  • • Beautiful appearance • Very light weight • Excellent case ventilation • Convenient cable management • Convenient mounts for 3.5 and 2.5 discs • PSU is covered with a casing • All necessary screws included
Cons
  • • Light weight - thin metal. The body is not made of foil, of course, but upon impact, it seems to me that they will warp • Transparent side cover made of acrylic plastic. It looks like glass, very light, the fact that it is scratched from the air is clear to everyone, BUT how much heat sticks to it . Even if you constantly wipe it, dust particles will still be visible on it • On the casing of the PSU there are two seats for 2.5, but one mount! And where can I get the second one? • Nibbling - the power button does not have an idle and soft click. When you press it, you get the feeling that it is pressing some more plastic under it. Dry and not interesting :)