CPU Cooler Enermax ETS-T50 AX Silent Edition Review

Let's see how it behaves in terms of TDP, in terms of size there are doubts that the data is true, but we'll see if the material and design of the tubes make it difficult In the case from NZXT with a monochrome motherboard, it looks bombic, for me the appearance is also important

Copes with the task, for amd must have! Due to the fact that the plane of contact is absolutely flat - the efficiency is excellent. Cools R5 3600 at 4200mhz

Stands in a well-ventilated case, thermal paste - Arctic MX-4, i7 5820K (TDP: 140W) in stock does not heat up above 57 degrees (in stress tests, in installation, in games)

My unbiased user perspective.Pros below: Design, mounting, quiet operation, efficient cooling. With its cons: Mounting the fan to the radiator. Not so important.

While it is difficult to say that there is some kind of service, let's see how the issue is resolved later. Then, if necessary, I will add. Pros: It is extremely difficult to find any merit in what cannot be established. Its cons: Incorrect packaging, the lower cooler clamp is missing. The store pushes the responsibility on the manufacturer.

everything would be fine, but the screws licked during installation, I think whether it is possible to replace or these twist and tighten normally

In my opinion, a super cooler for your money. And if there is no difference, then why overpay for super brands and names. Highly recommend.

Quietly and without panic cools 5 3600. Relatives thermal paste is replaced by a thermo bear. The airflow guide is removed, like minus a couple of degrees because of it.

Great tower for its 3500! Strict black design, excellent performance. Ryzen 5600x cools perfectly (temperatures at the peak do not rise above 73 degrees) Quiet. When assembling, the only nuance is troubles with the length of the screwdriver, but with proper dexterity, you can handle the usual one, but you have to twist it at an angle - carefully monitor the tightness of the fit to the process.

Big, heavy. The coloring is of high quality, it will not peel off from the slightest touch of staples and a screwdriver. Looks solid. The fan is 140 mm, it works from 530 to 1100 rpm, it cannot be completely turned off using PWM, it resists. It’s hard to tell by pressure or air flow, but if you feel it with your palm, the result is not impressive. If desired, you can finish with a more powerful propeller. Ryzen 5 2600x at 3900 MHz, in the stress test from AIDA64 (~125W thermal pack) holds at…

A normal cooler for its money will cool r5 3600, 5600 in overclocking, r7 2700, 3700, 5700 with overclocking of 400 +/- MHz will also pull, but no more than the manufacturer claims 230 watts of heat dissipation, in fact these are exorbitant figures for this cooler Has some pros: design, good backplate and affordable price at the time of purchase paid 3k Some cons: a large percentage of defects with turntables, I was not lucky and after 2 weeks he began to buzz like a damn, regardless of the…

I bought it after listening to good reviews online. didn't lie. the only thing worth noting is that for a comfortable installation you need to have a long screwdriver. without it, you will have to struggle with the usual one, especially if you install it right away in the case. because of this, I'm not sure that I ideally pressed it to the CPU. because my temperature is 3 degrees higher than in the reviews. but it's still below critical. in shaitan mode, the asus motherboard does not raise…

While it is difficult to say that there is some kind of service, let's see how the issue is resolved later. Then, if necessary, I will add.

Item received and installed. While the PC is at the assembly stage, I am waiting for the arrival of the RAM and I need to buy a hard one. Therefore, I can only rate the product partially. There were no problems with the installation. Partly with the help of the instructions, partly intuitively installed the backplate and mounts. I applied the paste, pressed the cooler without any problems and spun it. True, it should be noted that I have a screwdriver from Noctua. It just fits the length…

At first I wrote that it was making noise, but it turned out that it was the blowing cooler making noise. I corrected the situation, played Cyberpunk and I can say that the cooler is excellent, it is almost inaudible. The computer is on the floor half a meter away from me. The top section on the case has a blown cooler, so I would hear noise. But no, the i7 7700k heats up to 50 degrees and the cooler doesn't make any noise at all. The stock under the same circumstances was very noisy and the…

I use a xeon 2660 v4 processor, room temperature is 20-25 degrees, I forgot about throttling, the processor never drops the frequency, in dynamic scenes only the video card is loaded and slightly noisy (2060 is super). the cooler and radiator solved the problem of overheating forever, the RAM plate with the radiator may not fit in, a large case or a case with a bulge on the side for the cooler is also pressed.

I put it on Ryzen 7 2700, it cools wonderfully. Prots planned to overclock, but then changed his mind, and in the drain the temperatures are approximately the following: Simple: 36-38°C Low load: 39-42°C Average load: 45-52°C High load: 55-61°C Pros below: Pretty quiet, completely black, does not stand out from other components. Rotator 140mm. Thermal paste included. Cools well. Installing is easy enough. Some cons: It almost always works at maximum speed, while if you listen in complete…