🔧 D27257 Compressor Regulator by Devilbiss Craftsman Review

I've read some negative reviews about this part but I took a chance and I'm glad I did. The part was delivered quickly, looked and worked exactly like the original part, including correct reading of both reservoir and set pressure. My original part always had problems with the piston o-ring sticking, so I always take the regulator apart had to before using my compressor to re-lubricate the o-ring. My only regret is not replacing the original part sooner. Fast, cheap and good!

This was a direct replacement for my Craftsman 25 gallon compressor. It has changed like the wind and works just like the old one. Not sure why others reviewing this product say it only measures tank pressure. I get a separate tank and adjustable supply pressures like the old one. The old one leaked air unless the pressure regulator was turned all the way out. This new allows the outlet pressure to be adjusted separately from the tank pressure. Very happy with this replacement unit, part number

The regulator I received was not part of the D27257 and as many have said does not have a gauge port in the tank just an adjustable gauge port. There are actually two gauge ports, but one is plugged and both ports are for regulated pressure; Do not try to connect two sensors. If you are having problems with your regulator, you have several options. 1. Try to repair yours. A. Depressurize the tank and remove the retaining nut and plastic cover shroud, then remove the upper regulator dome. It has