Detector Combustible Streamlined Automatic Shut Down Review

1.[ Gas Leak Detector For Combustible Gas Detection]: The natural gas leak detector is mainly used for the detection of combustible gas in household gas stoves and water heaters. Cannot be used outdoors. Ambient temperature: 0°C-50°C; Environment humidity:<90%RH. 2.[ Sound And Light Dual Alarm Gas Detector ]:In order to let the user know the detection situation more clearly, the natural gas detector has buzzer and red light flashing to remind the user that the combustible gas content of the current environment exceeds the standard. The other two signal lights mean: the yellow light indicates that there is a small amount of combustible gas, and the green light indicates that the detector is turned on. 3.[ Gas Leak Detector for Hhome With High-sensitivity Sensor ]: This gas detector uses a high-speed and low-power microcomputer processor. The high-sensitivity sensor is intelligent and can measure gas quickly. Response time ≤60 seconds; Alarm frequency: 2.713KHz / 1000ms. 4.[ Easy-to-operate Gas Detector ]: After turning on the switch of the natural gas detector, you need to wait for about sixty seconds, and then move the detector close to the location where you want to detect if there is a flammable gas leak. Then through the light alarm and buzzer alarm that comes with the gas leak detector, you can know whether there is a leak. 5.[ Automatic Shut-down Gas Leak Detector ]: In order to make it safer to use and reduce power consumption, the combustible gas detector has an automatic shutdown function. 6.[ NOTICE ]: Before you use the tester, please make sure that the battery is not reversed. If the battery is installed backwards, the tester cannot be used. The battery required by the tester is two 1.5v batteries. The battery is not included in this product, please buy it elsewhere.