Drill for metal, screw BOSCH PointTeQ 2.608.577.351, 19 pcs. 1 mm Review

I didn’t notice it right away (on receipt, I only checked the completeness), after a detailed examination of the drill tips, one drill 9.5 shows traces of use, chips, factory grooves are erased. Do not recommend, bad product.

Bought for home use. Tired of rolled drills without packaging. All the most necessary sizes are collected here. The quality of sharpening is impressive, it is a pleasure to work.

Decided to ate my previous review. I had to drill about 50 holes with a diameter of 2.5 and 3.5 mm in thick metal to a depth of 15-20 mm. With the addition of oil and at low speeds, everything went off with a bang . the drills did not become dull, surprisingly. The quality of the drills is reminiscent of excellent Soviet drills.

You take the box in your hands and you feel - a thing! Everything is neat and thorough. Suitable as a gift for a master who knows a lot about a good tool. Pros: Great quality box. High-quality drills made of high-speed tool steel. With its cons: After examining the sharpening of drills, there is a feeling that PointTeQ branded sharpening is just marketing, it looks like sharpening, like sharpening, like all drills. Although I won't say for sure.

I used it to work on things where it was important to always have the right tool in hand. Since you can't see the overlooked ones in the placer, searching for what you need when drilling in bulk costs you valuable working minutes and doesn't guarantee that you'll find it. Now that I've opened the box, I can see that everything is in its proper location. There won't be any instances in which I take three superfluous puffs of varying diameters while leaving the right one out.

I took it for drilling and calibrating holes in plastic after 3D printing. They do an excellent job with this task. I can’t say anything about other materials, there was no need.

Pros: I liked the drills, the quality is decent, I used it for 4 months, I broke one 4mm drill because I drilled at an angle. With its cons: I drill wood and sometimes thin metal with them, after a few months of use, the sharpening sits down, but I don’t read this as a disadvantage.

Excellent set, very comfortable step, as well as the case itself. The quality of sharpening and drills is very good. With a 11mm drill, I drilled a total of more than 30 centimeters of iron (corners, sheets of 12 mm each), the drill does not think to get tired. But still, you need to be able to drill - you screwed up the drill by 12mm, for the very first time it gave too much speed and as a result the drill overheated and instantly became dull. It is important to drill at low speeds and without