🦅 Eagle A312X131HD Galvanized Collated 33 Gal Review

They run silky smooth through my Dewalt DCN692. good nails They hold up well too. Make sure you're a good target. Pulling 3.5 inches is hard work.

Seems to be of good quality and the person I gave it to has no complaints but it didn't work on my Metabo nailer even though it met all the specifications. Bought Metabo nails and it never stuck because.

They work but the paper is too thick in places and the spring in the gun won't retract them. I have to step back and let spring hit her many times. Some have fed normally, but when you have a bad line it hurts to keep going.

I'm sure these half head nails will work but do not buy them for the DEWALT DW325PT 33 Degree Paper Tape Nailer offered on this site by CPO as this will the case was nailer is advertised as a 33 degree nail gun and a 30 degree nail gun has arrived these 3.25 inch nails will NOT fit. The difference is only slight, but enough that bigger nails won't work. The 2 3/8 nails seem to work fine despite the mismatch.

I'm sure these half head nails will fit but do not buy them for the CPO DEWALT DW325PT 33 degree paper tape nailer offered on this site because although this one does Nailer is advertised as a 33 degree nailer, a 30 degree nailer has arrived which will NOT fit these 3.25 inch nails. The difference is only slight, but enough that bigger nails won't work. 2 3/8 nails work well despite mismatch.

Although these nails have been described as nails with a shouldered head, they are actually nails with a cut head. I used them in a Numax SFR3490 34° cut head nail gun which I also just received from Revain. I was only using 1 1/2 clamps at the time of posting but they worked great with no issues. Some nails don't drive all the way through when nailed, but that's the nature of nailing, and also a nail gun, not nails. Drive new and old (> 20 years old) 2x6 and 2x4 fir/pine. Very good value…

What about nails? They either work in your weapon or they don't. I have a Dewalt D51822 which I recently refurbished and have found I can no longer buy trimmed head nails. I immediately started searching the internet to see if my nailer was anything more than a paperweight. I found out that my old gun can use offset nails. Reading the reviews on here I saw that MANY people were in a similar situation and that other cut head nailers were reporting success with these nails. Guess what - I was…