🔍 ECCPP Towing Mirror for 99-07 Ford F250 F350 F450 F550 Super Duty, Side Mirror Replacement with Power Heat, Smoke Turn Signal, Telescopic Review

Fits and looks good but bad distortion in the passenger mirror and the screws are soft, one of them on the driver's side has broken off but it still fits well to the door. And the description should state that it has clear white highlights in a tinted lens, but hopefully I can convert them to amber. I tried to send them a message but I can't find them in the app.

One piece mirror with power, turn signal and heater. What. In case anyone is wondering, blue is the bottom light on the mirror, red is the top light, and amber or brown is warm. This took forever to figure out and would have been done in a fraction of the time if they had taken the time to take care of the schematics. I would definitely buy again

Put them on our 03 outing. A small change is needed for a better fit as another person was mentioned in the reviews. The connector fitted well and only 1 wire needed to be routed into the cabin for the position lights (blue wire on aftermarket harness), all other options worked great (heated mirrors, turn signals and power). Also, the mirrors look very sharp and I would recommend it to anyone looking to upgrade their side mirrors.

The product looks cheap but was originally a fairly cheap part. I wasn't expecting it to be like a factory mirror assembly but was hoping it would be of better quality. One of the mounting studs has scrolled into the mirror housing preventing a flush mount. I ended up using a different screw to get it working. The last complaint is that the mirror vibrates a lot when driving on the freeway. I'm in the process of reinstalling the factory mirrors.

I have 3 main complaints: 1) Poor fit, obviously not a Ford OEM. The attachment points in the door also have to be "modified" a bit so that they fit properly at all. I used a socket and a rubber mallet to bend a piece of metal. He too "stood" in place, and now I can't take them off. 2) Poor quality of materials - one of the bolts broke during installation with little to no effort. Seriously, I used a 1/4" socket. They don't pack things well. 3) The turn signal is smoky, not amber (as…

Note they will not fit flush without modification. However, this will surely compromise the original design in one way or another. I didn't remake mine in any way and just thought I'd address a small gap (it shouldn't be there at all). Well, despite my best efforts not to compromise the design, I still had an issue. I was driving on the freeway on my way home from a friend's house and the passenger side mirror fell off! Luckily my girlfriend was in the passenger seat and was able to pick him up

The mirrors were well packaged. Mirror glass looks very good. There is no ripple that others have mentioned. I bought mirrors with tinted lenses but the standard clear bulbs were included. I ended up replacing them with amber LEDs so they don't have to be changed, and now they glow amber instead of transparent. Be careful as the lens removal method is easy to break. Another reason to switch to LED bulbs. The installation took longer than I expected due to some issues with the light installation

I installed them on my 1999 F250. My truck has a round 4 pin connector. These mirrors have a rectangular connector that has several other pins to operate the turn signals, position lights and heated mirrors. But the manufacturer put an adapter in the box to convert my 4 pin connector to a right angle. My truck didn't have heated mirrors or turn signals, but getting them to work isn't hard. All you need is a test lamp (and the ability to use it). Turn signals can be found in the steering column…