🔧 Enhance Cleaning Efficiency with Envirocare Oreck XL Replacement Roller Brush Assembly Review

My son said that the old Oreck started smoking when it was switched on. I was about to throw it away but decided to turn it on to see what it was talking about. The brush didn't spin but the motor worked fine, there was no smoke or smell. So I removed the panel from below. The belt broke so I replaced it and reassembled the vacuum. Error on my part. The new belt burned out immediately, causing the smoke and smell my son was talking about. I took it apart again and found that the bearing had…

Looks like a quality reel, not a cheap fake. Unfortunately, I have an XL Platinum that needs a roller about an inch and a half longer. How to Tell Which You Have: Edge Brushes. If you have two individual brushes offset by 180° and all the brushes are on the wooden part of the roller, then this roller is not for you. video (which you can see on the image accompanying this video), then you've come to the right place and should order this video. I hope this helps someone. By the way, if this…

On my 15 year old Oreck XL2100 one of the bearings in the brush assembly has failed. For the past few years this vacuum has been used for garages/shops/decks (vacuuming brushed concrete is DIFFICULT). I ordered it and I'm really excited. My original roller had a plastic driven pulley, but this one has a metal one. (Some previous reviewers reported otherwise!) At first I thought I ordered the wrong one because the bristles were about twice as long as my old one. But it installed fine - now I…

Bought this with the understanding that it would be a replacement for the Oreck OEM roller brush and it was! The design and construction was the same as the original vacuum cleaner roller brush. The only (minor) difference was replacing the metal tip with a plastic tip. Does not affect the performance and life of the roller brush. This roller brush was a lot cheaper ($14) at Revain than if I bought it at Oreck. They wanted $30 for the brush and then they wanted to charge another $20 for the…

Background: The Oreck was given to us about 8 years ago because it didn't work. I disassembled it and found that the intake manifold was completely clogged and the drive belt snapped. Both fixed and we've been using it ever since, no problems. I figured the brush might need to be replaced, it was gaining weight anyway, but I found out later that it was due to the strong suction. Orek emailed asking if there is a way to tell when the brush needs to be replaced. Yes, place a ruler across the…