Enhance Your Water Quality with Everpure EV9259 24 QL3B Single Head Review

Everpure EV9259-24 QL3B single head does not properly support the filter cartridge - I had to discard it and replace it with Everpure EV927218 QL2 single cartridge. .

Bought and only fitted this year so the return period has expired. Leak at bypass flapper valve. So we replaced the originals (same point of failure). We have 3 in total. Good product overall. Must order now.

I work in the commercial ice industry and have been using Everpure filters from the start. I have installed on the kitchen sink in my house for many years. Sounds good enough to promote these guys. If you need clean water, and I do, then this is what you need. Turn off your filter before it's time to add a small, separate faucet to your sink. Yes, you may have to drill a hole, but it's worth it. Oh, and your coffee will be way better.

I love this water filtration system. The plumber originally installed a commercial unit in my house. I needed this replacement because of a leak elsewhere on a rusted head. I had some trouble figuring out what parts you use to connect the water lines, but the seller quickly found a solution and even offered to ship the connectors to me. I was able to reuse the old ones and get filtered water back when needed!

Does not come with two tube fittings (inlet and outlet), probably because users use different diameter tubes and the fittings can be bent or straight. Buy what you need at a hardware store or online. My fittings are for ¼" OD tubing, with the outlet tubing going to a potable water faucet (also branches downstream to connect to a refrigerator icemaker). But you can have ⅜" OD tubing, or even larger The threaded end of these fittings should be ⅜" NPT, this end will thread into the top of this…

I bought a QL3B to replace a stuck QL3. (On the old QL3, we couldn't turn the locking ring or the filter.) On the QL3B, filters are much easier to remove and install. With the old QL3, we used to spend a few minutes removing the old filter and then another few minutes putting it on. Whenever the valve was turned back on, there was always a moment of doubt as to whether or not it would work. Filters can be attached and removed from the QL3B in seconds. QL3B has a simpler mechanism. It lacks the…