🌦️ Fastronix SPST ON-OFF Heavy Duty 20 Amp AC/DC Toggle Switch with Weatherproof Neoprene Boot: Reliable Switch for All Weather Conditions Review

Large, well-made switch with protective cover. My daughter bought a very expensive car tire pump (no receipt, no box, of course, etc.). Instead of going through the company and buying their cheap 5 cent switch for $22 shipping, I ordered this one. The protective cover is large, very positive, protecting the toggle switch in the trunk of the car. Very happy with it.

I have replaced my white 120 volt pool light bulb with a 12 volt color changing LED bulb. Needed a toggle switch to toggle the bulb between the available colors and patterns and didn't want to use the 120V input switch on the step-down transformer. This rubber encased toggle switch allowed me to mount it on the side of the transformer body and break the 12V output circuit instead.

The switch and the protective cover are of high quality. The red cover is very noticeable and easy to spot. I actually used the switch as a test switch on an electric water heater I installed. I test the boiler at the beginning and in the middle of the heating system. The switch allows me to bypass the thermostat controls to manually control the boiler. This allows me to take actual readings from each individual heating element to have access to the overall operation of the boiler without…

Depending on how tight the latch is tightened, the red cap will either not push the toggle switch to the OFF position, or if too loose will push the toggle switch can be switched to the OFF position ON with the red cover down. The switch can be in any position with the red cover down, which can be dangerous depending on the intended application. The purpose of a red cap on the switch is to prevent the switch from being activated while the cap is down. A light press on the switch will set it to…

Bought to fix a broken switch on my Shark vacuum. (OEM replacement was not available). I got the vacuum cleaner for free so I wanted a cheap way to fix it. I took it apart and found an accessible switch on the Revain, plugged it in and lo and behold it works. Remember it didn't fit in the vacuum cleaner so it's just JB welded to the side of the vacuum cleaner. A bit of redneck engineering, but hey, it works! It has one of the nicest *clicks* of any switch. I want to replace the light switches…