💧 Black 4 Pcs/8 Pcs OD 16mm Water Cooling Compression Fitting w/ Sealing Rings for Rigid Acrylic Tube - Computer Water Cooling System - Fosa Review

This fit is almost the same as Thermaltake but slightly cheaper than the brand. The choke works pretty much the same and has held up very well so far. The big difference is in the prices, e.g. B. the price for 6 Thermaltake fittings, you can get 12 of them for the same price or less. Of course the connectors have two o-rings inside, use a hex wrench to secure the inner connectors and insert the coolant tube. The rest is holding up well so far.

Started a fairly large project for rigid PETG tubing. Two flex, CPU with Aquacomputer, 240mm Alphacool 60mm wheel and visual meter on GPU acrylic plate (why not at the moment) and GPU with Aquacomputer and MOSFET blocks and 420mm Alphacool resolution. It was a complete hash project. A case not designed for something like this (Corsair 750d Airflow, $50 new in the box on Craigslist), Res Tube with separate pump in one circuit and Touchaqua xyz which I got used to almost for nothing ($45 with a…

Affordable price but you get what you pay for. The fittings, while airtight (watertight), are not as tight as the fittings that cost $10 instead of $4. However, they do their job at a good price.

I used these 16mm freezemod fittings as well as 14mm freezemod hardline fittings. They are very easy to use and give good results. Don't be fooled by the low cost, these fittings work well and look fantastic. These are quite suitable fittings for low profile applications. The photo uses Thermaltake 16mm V-Tubler PETG tubing. These fittings use a double seal on the inside and one for the compression ring. As with most rigid compression fittings, an internal o-ring provides a seal. The outer ring

First of all, do not take negative reviews for something negative about the quality of this accessory. The reviewers themselves accidentally ordered the wrong ones or accidentally sent the wrong size, I don't know and I don't care. Chromed brass fittings, black anodized aluminum rings. Tighten the fittings in the water block, radiator, pump, etc. There are 3 O-rings that seal the pipe, 2 in the fitting and 1 that goes through the pipe and compresses when the outer ring is tightened to secure…