Green 405Nm UV Curing Fast-Curing Photopolymer Resin For LCD/DLP/SLA 3D Printer, 1000G Standard Low Shrinkage High Precision 3D Printing Material Review

Using this on my Anycubic Mono 4K slicing with Lychee. The resin settings were not in Lychee but info on the interweb showed the settings to be right within the parameters of the Anycubic Basic Gray. That is the resin I usually use so I left all of my settings the same and my prints have been perfect.Low odor, the bottle shape makes pouring way easier, nearly no bubbles on the surface after filling the resin vat (anycubic resin would produce lots of little bubbles in the liquid resin) it has…

I got the SUNLU 3D Printer Resin (500g per Bottle, Light Grey/White/Clear Blue/Clear Red) to use with my Elfin 3 Mini. So far, I've had consistently high-quality prints, no issues, and cleanup is trivial, though I did have to increase exposure by 15%. The white resin has a slightly bluish cast to it, which makes it look kind of like marble. The blue and red are reminiscent of plastic colors from my childhood toys. The price of this set is lower, on a per liter basis, than what I usually pay for

Getting some great prints with this stuff. Been trying out different resins and this sunlu is awesome compared to some of the bigger brands. Tried the blue transparent and Grey. Low odor compared to some which is great and its a little runny. Gonna be my go to from now on I think. Now if I can find some deals around Christmas so I can print more stuff

Using the settings recommended by the product, and several others there were 9 failed prints in a row, coming from the Anycubic where I barely had a fail with minor adjustments, this was a tremendous waste of money. It was literally pouring resin down the drain, the 2 prints that came out were so brittle they snapped when trying to put together. Again not recommended at all, stick with Anycubic.

A really nice FLAT white finish. The other whites that finish glossy look tackier and cheaper. Just don't cure it in the sun. It will become yellower and look melted and bad. Details are lost. I find that my prints are sturdy enough without curing so I just clean them up and let them be.

The resin flows more like skim milk than resin and it reflects in the brittleness. Even with the settings dialed in. Unless you print with thick walls and 10 bottom layers, you can snap it half with little force. Just not worth it.

This resin is a good quality. The shrinkage is very minimal company to other brands that are more expensive. There is also no white residue left over when cured and washed. Would recommend over most other brands.

I always like to try new resins. I have purchased the black and so far it has been a good resin. I have gone through about half a bottle so far. I am looking forward to trying the other colors when I get a chance.

This is a solid affordable resin. I still get great quality prints. My only complaint is it does have a slightly longer cure the compared to other brands. Other brands I cure at 1.6sWith Sunlu I'm pushing 1.9-2s.

Very amazing resin took a bit of testing got it right and it printed amazing! I love this resin and already bought more! Thanks for attention!

very nice deep and rich color, the other sheer blues i have bought were no where near as saturated with color That's my review.

As a beginner to resin printing this liquid was easy to work with and packaged very well. It had an inflatable bottle protector which I thought was genius.

I resin print for a living and have tried most of the resins out there. I recently switched to using SUNLU as I can't tell the difference between it and the higher price brands. It performs well. It's also compatible with itself and other resin brands for color mixing if you like to experiment.

I don’t recommend this resin or this company at all. this resin feels like junk compared to any other resin. After a day it’ll settle 100% in a vat. Like it’s unusable and you’ll have to drain and shake it each time. It also requires much more curing time than any other resin to adhere to the build plate.

Yeah theyre a bear to prime- have to get full coverage, but the reliability us second to none, plus you can have shooter times on your layers, used the whole bottle, only failure I had were improperly supported, I lost a tail

I absolutely love this product. I have been using it to print minis on my Wiiboox light 130 and the results are AMAZING. The product is awesome its extremely durable the containers are fantastic the packaging is maybe a bit over the top. But i look forward to using this again

First off I haven't had a single failed print with this resin. I was on the fence about 4 or 5 stars as it might be a bit easy to Crack, but I'm not sure if that was the resin, my cure time, or just my twisting then part wrong by accident. Details are good so far, and haven't seen any shiny residue after cleaning. I'd buy this over and over

Just like the title it needs better settings so you’ll need to take some time to print test prints before you try actual prints

This is a high quality resin at a very good price. I very much like the dark grey. I had no problems on my standard settings and on my Elegoo Saturn 2 at .040 layer height the prints were really well detailed.