I specifically bought this pump in the hope of solving a problem that annoyed me. I live in a private house, the water is from a shallow well. Water is heated by a double-circuit gas boiler. Previously, there was a station with a 100-liter hydraulic tank, respectively, the pressure floated, from about 1.5 to 3.5 bar. And when you take a shower, the water is either hot or suddenly cold - it seems that it just depends on the pressure. After being scalded a couple of times, I realized that I…

The season worked without problems, the summer was dry, the water level in the well dropped by two meters - in the spring it was about one and a half meters from the surface, at the end of summer it was already four meters, if not more. I probably would not have noticed the difference if the neighbors had not complained that the well had dried up. And it works for me and everything is fine, it did not affect the pressure in any way. Before Skala, I used a station with a pressure tank, where the

Different pros: Good functionality and adaptability of management. High quality printed circuit board. Working with backwater or pumping water out of a tank. Cons: Reliability leaves much to be desired. Not designed to work with a well.

Bought SCALA2 to replace MQ3-35. The pump has worked for 10 years. The control board has deteriorated, in the replacement of which I stuck a simple automation (PM / 5-3W). and the old pump started working again. Regarding the new SCALA2: I put it on the same shallow Abyssinian well 13 meters with a mirror 1.5 meters, with which MQ worked. Gives excellent pressure with less power 550W -Scala2, 850W - MQ. pressure scale in the middle. one inch hose into the well, reinforced with food, with a 3/4

Used for a private house (kitchen, 2 bathrooms, watering). Pressure increase + water intake from the barrel during shutdowns. After 2.5 years of work, the board died (condensate, or leaked from above), I bought a replacement for 1.5 tons for ebay while he lives. At the same time, I added ESP32 there, now there is control over wifi directly, and not through an outlet. The body in the humid conditions of the inlet well decomposes, I hope it will survive until the summer, and there, in terms of…

The operating characteristics are greatly overestimated, the station at a pressure of 4 ba (on its own scale) cannot provide a normal pressure of two water intake points . with an open tap to the street (to the garden), on the second floor of the house, there is no water at all, i. E. not a drop, and on the first floor (at the second point of the fence) the pressure is meager (a thin trickle). At the same time, I have a centralized water supply .

Shows the error "Leak" due to the presence of a reverse osmosis filter (the constant discharge of water in a thin stream provokes an error indication). Not critical. Under the pump, you can not put anything at all (gum there, etc.), because. it does not produce vibrations (well, if you put it next to the bed, then it may be uncomfortable) :) I consider the filter at the inlet to be mandatory. And more.

I bought it as a replacement for MQ3-35 with water intake from a well 8 m (MQ is noisy for installation in a house). To check the work, I put it in the bath (shower, tub and tank in the steam room). I did everything according to the manual for the first start. And . then disappointment occurred during the pumping of water from the tank (see above). MQ pumps water from a well in 20-30 seconds, but this . I described everything above. This craft did not even begin to install as planned. In…

I live in a country house. Water from a well near the house, the pumping station is doing quite well. While he lived alone, for a couple of years, one might say, he experimented - he installed different pumps, one cheaper than the other, and looked at how long they would last. Record - a couple of weeks! This is with a small flow of water, one needs a little. When a family appeared, I had to stop experimenting and think about something more reliable. I tried almost all cheap pumps, and I didn’t

water is supplied from the main pipeline. Skala2 took the place of MQ (worked for more than 8 years). the water level in the conduit dropped (an inset in the middle of the pipeline) and the station caught air. gave an error. everything is logical . only in the instructions in English there are different versions of the same error and ways to solve them. at office The website doesn't exist either. and not in the box. They frankly scored on the instructions in 2022 !

I wanted to take the DAB 1200, but eventually succumbed to the laudatory reviews and marketing advertising on the Grundfos website and decided to try the Grunfos SCALA2 3-45 pumping station. I tried and left. Thing. Quiet. Holds pressure regardless of the number of open taps. The pump consumes at a maximum of 580 watts. On power set half the scale. The pressure margin is decent. Generally satisfied

I am not an expert in the pumping field, but the sounds that I heard on the first use were not at all like the operation of a 21st century machine. I immediately felt - not that, maybe some kind of marriage got caught. I worked for 1 year and 3 months normally, the other day it dripped from below, it doesn’t work smoothly, it doesn’t give pressure, then it suddenly appears - I turned it off, there is no water, I’m waiting for service! A day passed after submitting an application to the 24…

I liked the idea itself, constant pressure, no need for an expansion tank and a compact installation in the house, in which case you don’t need to climb into the well to service the pump (especially in winter). In the house, all the pumps are from the same company and there are no problems, but here it is somehow not at all a reliable product, although I liked this format of the station.

Acquired a rock 2 thought a serious station. As a result, when working with a hot water tank, the station turns on and does not turn off at all. Doesn't get into an accident. It heats up like an oven. In order to turn off the water, it is necessary to open the water to the street for irrigation. I took it to a service in Odintsovo, they said the station is working. In short, money down the drain

The pump itself does a great job. But after 1.5-2 years you will have to fork out for a new one. Considering the SEVERE EXAMINATION OF SERVICE CENTERS, there are risks that you will not get a free new pump under warranty. In the instructions, the manufacturer "promises" the operation of the pump for FIVE (!) years with a 2-year warranty. THIS IS CRAZY (now it's called a "marketing ploy" 😅) CONCLUSION: STRONGLY DO NOT RECOMMEND! Currently bought another cool pump with similar cool features from

From the frequent intake in small doses, her roof is going. It pumps air inside itself and can no longer raise the pressure more than 2 atm. Shutting off the line does not help, only bleeding air near the pumping station. One solution is a hydraulic accumulator. But then what's the point of buying it and overpaying? 5m to the water table, 7m to the well, 1m horizontally to the pumping station. Suction pipe 40 PPR. To the farthest point of water analysis 8m vertically. In short, if you have…

The ease of installation and configuration struck me, why I called specialists - I don’t understand. The master connected the input-output, filled in the water, powered it from the outlet and everything worked. Plus, despite its small size, the pump pumps and keeps even pressure quite well, without creating unnecessary noise. At the moment, the pump feeds 6 points around the house, no pressure drops have been noticed, everything is stable. I don't regret buying this pump.

Pros: Great pump. Works quietly. It holds pressure well even with three open taps. With its cons: If it were a little cheaper, there would be no drawbacks at all.

I have been using the station for about a year, no problems have arisen. Installed on the loggia of a panel high-rise building, the noise does not interfere at all! The neighbors don't hear her at all! I will say even more, on the same loggia I made myself an office and the noise does not bother me either. I connected it through a system of check valves, now I don’t even notice when the water is turned off (yes . we have water on schedule, in the morning and in the evening). I recommend!

Prices have skyrocketed, of course, but the pump is excellent, I recommend it. Pros: Bought in the summer of 2022 for an Abyssinian well. Depth 12, a mirror somewhere around 9. The pump itself is in a caisson -2m. There is a hydraulic accumulator, not a big one. Before entering the house (bath) 10-15 meters. Washbasin, shower. In the summer, a pool was poured with a diameter of 5.5 and a depth of 1.6, they poured it in a day. Very satisfied, it works. Its cons: Not informative panel with…