🔧 Adjustable Cabinet Hardware Jig Punch Locator Drill Guide Template for Wood Drilling Dowelling Handles and Knobs, Pull Installation Template Tools - Upgrade Style with Automatic Center Punch and Drill Bit Review

Without this tool I would not have been able to assemble all these steps in the time available to me. The only downside is that the punch is very small compared to the hole. So if you insert it to mark where you are going to drill you can deviate an eighth of an inch from the 16th on each side or up and down from the 16th, so if the left side is on the 16th top right, am 16. They have a 1/8 inch difference, so we measure before we drill

When I bought this my biggest concern was if it would loosen over time and be as accurate. I had to drill 28 doors and drawers for very frilly (but beautiful) handles. I installed it, screwed it in as tight as I could, and prayed. When I finished all of the deadlifts, nothing would move at all - every one down to the last was perfect. I'm so glad it cut drilling time in half. I did not drill the jig - the included drill bit was too small for my use - instead I used a hammer drill to mark the…

A good tool works well if you can put it together. The one I received had the plastic molded or glued on to prevent the ruler from slipping through. I managed to take a flat file and cut it so the ruler went in the central plastic letter "T". After that it worked fine. Punch is a nice touch. but depending on what you're working with, it can be difficult to hold the gauge and apply enough pressure to the plunger to make it work. I ended up just using my cordless drill to make the starting holes…