Header banner
Revain logoHome Page
🔧 efficient rv water heater element wrench: 6" hex socket removal tool for easy tube spanner, 1-1/16" x 1-1/2" x 6" length logo

🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length Review

5

·

Poor

Revainrating 2 out of 5  
Rating 
2.0
🔨 Hand Tools, 🔧 Automotive Tools & Equipment

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length
img 2 attached to 🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length
img 3 attached to 🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length
img 4 attached to 🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length

Details

BrandKetofa
MaterialWood
Head StyleHex

Description of 🔧 Efficient RV Water Heater Element Wrench: 6" Hex Socket Removal Tool for Easy Tube Spanner, 1-1/16" x 1-1/2" x 6" Length

✅Product size:One end size 1-1/2" hex and Another end size 1-1/16" hex compatible removing all Anode Rod 3/4" NPT. ✅Fit Brands:Camco, GE, Rheem, Rudd, Richmond, Montgomery Ward, Sears/ Ken more, State, Norge, Westinghouse, Reliance, Noland, A.O. Smith, Bradford White, GS Wood, May tag, Whirlpool and Duro-Matic water heaters, some Suburban & Mor-Flo. ✅Water Heater Element Wrench combine with anode rod removal tool easy to use,features A3 Carbon Steel Galvanized Construction ,Use corrosion-resistant materials. ✅The total length is 6 inches (15 cm) with 8 mm rotatable cross holes to provide the clearance required for proper connection and easy loosening. ✅If you want to protect the water tank and keep the water tank in the best condition for the next few years, you must repair the anode and components on the water heater. Due to its perfect performance, the pipe wrench is only a tool to remove or re-tighten the anode rod.

Reviews

Global ratings 5
  • 5
    0
  • 4
    0
  • 3
    2
  • 2
    1
  • 1
    2

Type of review

Revainrating 2 out of 5

Rather spend a few euros more and buy the right tool.

This tool is too short to be very useful. The hole at the end where a screwdriver or other prying tool can be inserted is too close to the side wall of the trailer to be used. Instead of drilling another hole like a YouTube video suggested, I just ordered a Camco water heater bushing and it worked like a charm.

Pros
  • ✅Fits brands: Camco, GE, Rheem, Rudd, Richmond, Montgomery Ward, Sears/Ken More, State, Norge, Westinghouse, Reliance, Noland, AO Smith, Bradford White, GS Wood, May tag, Whirlpool and Duro- Matic water heaters, some Suburban and Mor-Flo.
Cons
  • Not bad, but...

Revainrating 3 out of 5

You may also need a 1 1/16 " socket and ratchet

Despite using teflon tape I sometimes find that the rod is very tight in its seat, if so this sleeve starts to deform in the holes and/or the cross shaft starts to close bend. Time to find a 1 1/16" socket wrench, extension and 3/4" ratchet handle. For the price, however, this socket wrench is good to have in your emergency tool box. Other similar sockets come with a cross shank. Please note that this is not the case. I would rather risk bending the supplied cross-shank than breaking the handle

Pros
  • ✅The water heater element wrench combined with the anode rod removal tool is easy to use, Zinc Plated A3 carbon steel construction，Use corrosion-resistant materials.
Cons
  • I don't remember but there was something

Revainrating 1 out of 5

As an all-in-one, not a bad idea, though.

The advantage of this tool is that it is double ended, which allows you to pull out both the heating element and the drain plug. Due to its thin-walled design, the 1-1/2" end fits through the rather small opening in the water heater jacket with no problem. A few things I did NOT like about this "outlet". 1) 1-1/2" "Side gaps on first application of torque and I haven't even tried prying out the heating element. It ruined the instrument. The thickness of the steel from which it is made is too…

Pros
  • ✅If you want to protect your water tank and keep it in top condition for years to come, you need to repair the anode and water heater components. Because of its excellent performance, the pipe wrench is just a tool for removing or re-tightening the anode rod.
Cons
  • Piggy Bank Price

Revainrating 3 out of 5

Rather spend a few euros more and buy the right tool.

This tool is actually too short to be very useful. The hole at the end where a screwdriver or other prying tool can be inserted is too close to the side wall of the trailer to be used. Instead of drilling another hole like a YouTube video suggested, I just ordered a Camco water heater bushing and it worked like a charm.

Pros
  • ✅ 6" (15cm) overall length with 8mm diameter pivoting cross holes to provide the clearance needed for proper connection and easy disconnection.
Cons
  • I don't remember

Revainrating 1 out of 5

You may also need the 1 1/16 " socket wrench and ratchet

Despite using teflon tape I sometimes find the rod to be very tight in its joint, hence this head starts to warp through the holes and/or the cross shaft starts to bend In that case, it's time to find a 1 1/16" socket, an extension, and a 3/4" ratchet. Similar sockets have a cross shank, that's not the case, I'd rather risk bending it of the included transverse shaft than breaking or bending the handle insert one of my screwdrivers.

Pros
  • ✅If you want to protect your water tank and keep it in the best possible condition for years to come, you should repair the anode and water heater components. Because of its excellence, the pipe wrench is just a tool for removing or re-tightening the anode rod
Cons
  • Concise Instructions