Hengs 90008 C1 Replacement Lid 58621 Review

The lid did not fit. The measurement given is not an exact measurement. Also, I have to pay for the return shipping and restocking fees.

I loved the response when I had to return the product due to damage. The replacement was delivered very quickly with no problems.

Had to make some modifications to accommodate my old ventilation. The loop was different but was replaced with a piano loop. I had to use old screws to attach the rail. This is much better than changing the entire ventilation.

Perfect fit. All of these bad reviews are written by people who either didn't know what they were doing or didn't read how to take measurements and order the right one. Read the description carefully to make sure you get the right one.

I originally ordered a 24x17 and when it arrived it was an inch larger on each side. to 15x22 and it was right! Although my real world dimensions are 25x18 along the extreme edges of the vent cover. Not at all sure what 15x22 has to do with this.

Used to replace a Jensen cover on a same size air vent manufactured in 2004. I drilled out the old rivets from the hinge, I had to use the hinge from the old cover. I had to use an old aluminum profile that is wrapped, it had to be shortened. It will work, but it's not easy to adapt. Replacing the entire vent is more difficult, all 38 holes are in different places, 76 holes in my fiberglass trailer would have weakened it significantly. Can make template and drill aluminum frame

Should have read the reviews! This will NOT fit the 22" Ventline escape hatch! This is NOT a Ventline product! I actually got an aftermarket vent cap from Heng that was designed for 22" Jensen escape hatches, which are actually smaller than Ventline hatches .This cover is too small to fit on the Ventline base.I was hoping this was a new part from old stock but apparently the Ventline BV0586-04 caps are obsolete.There is none!I scoured the web and called several vendors. Revane was the only…