Works Great. For all of those out there knocking the swtich saying it gets too hot. First off do your math. This switch can handle up to 20amp. that's right at 250 watts as it's peak. If you are using this to switch heavy loads your insane. You should never run a switch, circuit or anything at it's max load. At best you should be switching no more than 10amps. That's 120 watts of light ect. Quit being cheap buy what you actually need and quit knocking products that you are using outside of…

NOT an LED Indicator Light!. The light is not polarized, the resistance is too low for an LED and they run HOT. The good news is that you do not need to connect the tungsten light when wiring them. And they seem to burn out pretty quickly anyway. I don't know how to get revain to get this vendor to correct their product description.After drilling the mounting hole, you must make a small notch on the forward edge of the hole to permit the key on the switch to fit. Otherwise you can cut the key…

I looked around for some switches that had blue LED indications when the switch was in the "On" position. I didn't quite need ten of the switches, but for the price, I figured it was worth it. Packaging is typical warehouse parts type packaging, so don't expect the retail packing features like documentation and installation instructions. But the switches are marked clearly enough to where someone with a little experience can figure out the connections. The wire terminals are decent and…