🖨️ HP LaserJet Pro P1606dn Printer (CE749A) - Improved Performance in an Old Version Review

I liked the model, I have been using it for about a year! Z. Y. I buy cartridges with plugs for adding toner and cleaning the sump, there are no problems with refilling. Got pros: Small, fast enough for the money, and of course double-sided printing. Has some cons: I could not make friends with XP wines, the printer refused to print 2 copies of the document, probably there was some kind of jamb in the firewood, I set the seven and the norm.

I’ve been using it for half a year, I was pleasantly surprised by the function (I hadn’t seen it before) I connected the built-in drivers (the disk with firewood turned out to be superfluous) to USB and then he himself suggested installing the driver. Double-sided printing - very convenient in Word there is an additional function in the choice of printing. Refilling a cartridge is 350, and in general HP has one of the most affordable refills. They wrote here that the cartridge is enough for…

This device is ideal for a home office with a couple of users, occasionally typing something, as in my case. However, if the annual print volume exceeds 4-5 packs of paper, then it makes sense to pay attention to something else, where the supply of the cartridge is more. In other matters, the cartridge is not critical, in the end it can be refilled. So the unit, with all its pluses and minuses, even if you find fault very much, deserves a solid four.

They took such 7 pieces to a company for a large volume of printing, in fact, for 2 years of use, only one died, for unknown reasons, the metal paper feed mechanism was bent. They cope well with print volumes, but often have to change the cartridge (compared to the HP LJ 1022, about 2-2.5 times more often), except for the cartridge, there have been no problems with them for 2 years.

It is best to buy LJ 2420 dn, cheap consumables. and a 6000 page cartridge. (not chipped), despite the fact that they are only used.

We have been using this at work since about 2022, connected via a network. Works exclusively on compatible and refilled cartridges. Now the operating time is already more than 42,000 pages, the flight is normal. Pros below: Works stably. There is automatic two-sided printing, Ethernet, web-interface, you can ate the firmware. Supports HP ePrint: an interesting thing, but we do not use it (activated via the web interface). Has some cons: HP 78A cartridges are expensive, chipped and of small…

I wanted a laser for a long time, at first I bought it for work, it worked perfectly for half a year, sometimes there were problems with searching the network from a temporary laptop. After refilling the cartridge that comes with the printer, it prints faintly, and this is striking. When I went to refill my cartridge, they said that this model is always pale, offered to buy an analogue for 800. Prints well. I print a lot in bursts, manuals, brochures, etc. I work out duplex printing well, I…

I bought it home, primarily as a network one for the convenience of printing from 2 laptops. Cartridges are refilled, though they start to streak after the first refueling. The print speed is amazing. For the house, probably, it could have been simpler to buy, but it suits me.

I have never seen a worse printer at the cost of printing one sheet. Once I overlooked the settings (by default it has 1200 points) - a department of 4 people ate the cartridge in one day. Tired of refilling and changing cartridges. The price of the device is very good, BUT! free cheese you know where. PS Saved on the cost of the device - you will go broke on cartridges.

I took it because of double-sided printing, and immediately after unpacking, with double-sided printing, the second side of the sheet prints very crooked . i. E. The first side prints exactly, and the second side folds by 15 degrees . Got pros: when connected to usb, it mounts a virtual cd drive with drivers, very convenient. Some cons: When printing double-sided, the second side of the sheet prints very crooked.

Bought for the office. After using it for more than 2 years, I bought the same unit home. All comments about printing 4-5 packs a year can be thrown away. Prints 1-2 packs a day. According to the given volume of printing: The consumable is only the thermal film of the printer. It doesn't hold a lot of volume. If you replace it with a metallized one, then the film will have to be changed only after a run of ~ 70,000 sheets. It can be advised for a small department, 3-5 people and a print…

I bought it for an enterprise, I urgently needed to print a large amount of pages in duplex. Reading the reviews, I thought I didn’t buy it (But what a surprise, in 6 days I printed more than 8000 pages. The cartridge is native (the factory refill was enough for 1300 pages). As for the print quality after refilling, I don’t agree with the reviews, it prints no worse than on a new one. the eco mode became not very good, everything is super at 600. I think the deterioration of the print is due to

The main trouble with this printer is the very small volume of the cartridge. He does not care for any declared 2022 sheets. The second problem is "capriciousness" when refueling. At the beginning, everything is fine, then the print starts to become more faded, then it becomes clear that there are several alternative methods for how to achieve black printing.