Huaute V13H010L49 ELPLP49 Replacement PowerLite Review

Good but not the best replacement. Next time I'll look for something else. I had to remove the lens and use the previous original lens from the previous lamp to stop the projection flickering.

The first lamp lasted 200 hours, thought it was an accident, the second lasted less than 24. Don't buy them, terrible quality even for such a low price.

Not recommended! It turned on but started smelling like burnt electronics. The case was very hot after turning it off and I had to let it cool down before packing it back up to return it.

This replacement bulb will not fit. While running, it causes an intermittent high-pitched beep from the projector and also seems to have a few hotspots in the center of the screen, which are very noticeable when full-color is displayed on the screen.

This replacement lamp is not suitable. While running, it causes an intermittent high-pitched beep from the projector and also seems to have a few hot spots in the center of the screen, which are very noticeable when full-color is displayed on the screen.

Bought and unfortunately sent back. The brightness is ok, but I had a 10 cm wide discolored (blue/purple) edge on both. I also put the original lamp back in and there was no stripe (so otherwise no defect). Returns were no problem for Revain.

It works and is a worthy value because the price is so low. But it's nowhere near as bright as the standard bulb. With the original lightbulb, I was able to leave the light on in the room even in economy mode. No, my projector isn't working, but I have to turn off the lights and watch at night to get a decent picture. And yes, I turned off economy mode, increased brightness, color temperature, and gamma. It's just a dim lightbulb.